Sony HDWS280 VTR, Deck and Player

Power requirements

100 to 240 V, 50/60 Hz

Power consumption

80 W (AC operation), 60 W (DC operation)

Operating temperature

+5 to +40 °C (41 to 104 °F)

Storage temperature

-20 to +60 °C (-4 to +140 °F)

Humidity

25 to 80%

Mass

6 kg (13 lb 4 oz)

Dimensions (W x H x D)

210 x 132 x 425 mm (8 3/8 x 5 1/4 x 16 3/4 inches)

Tape speed

HDCAM: 96.7 mm/s (59.94i, 29.97PsF), 80.6 mm/s (50i, 25PsF), 77.4 mm/s (24PsF, 23.98PsF) BETACAM SX: 59.6 mm/s BETACAM/BETACAM SP: 118.6 mm/s (525/59.94), 101.5 mm/s (625/50)

HDCAM record/playback time

40 minutes (59.94i, 29.97PsF, with BCT-40HD cassette) 48 minutes (50i, 25PsF, with BCT-40HD cassette) 50 minutes (24PsF, 23.98PsF, with BCT-40HD cassette)

Fast forward/rewind time

Approx. 4 minutes (fast-forward), 3 minutes (rewind)

Search speed range - Shuttle mode

Still to ±10 times normal speed playback

Jog mode

Still to ±1 times normal speed playback

Servo lock time

1.0 s or less

Load/unload time

7 s or less

HD-SDI input

BNC x 1 (SMPTE 292M), Serial Digital (1.485 Gb/s)

Reference video input

BNC x 2 (with a loop-through), Tri-level sync, 0.6 Vp-p, 75 ƒ?Ý , sync negative or Black Burst or Composite, 0.3 Vp-p, 75 ƒ?Ý , sync negative

Analog audio input (CH 1/2)

XLR-3-pin type, female x 2, +4/0/-3/-20/-60 dBu selectable, high impedance, balanced

Timecode input

BNC x1 (0.5 to 18 Vp-p, 10 kƒ?Ý, balanced)

HD-SDI output

BNC x 2 (SMPTE 292M), Serial Digital (1.485 Gb/s)

SD-SDI output

BNC x 2 (SMPTE 259M including one character out), Serial Digital (270 Mb/s)

Analog composite output

BNC x 2 (RS-170A, including one character out) Y: 1.0 Vp-p, sync negative, R-Y/B-Y: 0.7 Vp-p, 75 ƒ?Ý

Analog audio output (CH 1/2)

XLR-3-pin type, male x 2, +4 dBm (600 ƒ?Ý load), low impedance, balanced

Timecode output

BNC x1 (1.0 Vp-p, unbalanced)

Audio monitor output L/R

XLR-3-pin type, male x 2, +4 dBm (600 ƒ?Ý load), low impedance, balanced

Headphones

JM-60 Stereo phone jack (-∞ to -12 dBu at 8 ƒ?Ý load, unbalanced)

Remote (RS-422)

D-sub 9-pin, Sony 9-pin remote interface

Video control

D-sub 9-pin

DC output

Round shape 4-pin, female x 1, for RM-280 or BVR-3 controller

Others

“Memory Stick” slot

Video level

±3 dB/∞ to +3 dB, selectable

Chroma level

±3 dB/∞ to +3 dB, selectable

Set up/black level

±210 mV

Chroma phase/hue

±30°

System sync phase

±15 µs

System SC phase

±200 ns

Y/C delay

±100 ns

Sampling frequency

Y: 74.25MHz, R-Y/B-Y: 37.125MHz

Quantization

10 bit/sample (compression: 8 bit/sample)

Compression

Coefficient recording system

Channel coding

S-I-NRZI PR-IV

Error correction

Reed-Solomon code

Bandwidth

Y: 0 to 5.75MHz +0.5 dB/-2.0 dB, R-Y/B-Y: 0 to 2.75MHz +0.5 dB/-2.0 dB

S/N ratio

53 dB or more

Differential gain

2% or less

Differential phase

2% or less

Y/C delay

20 ns or less

K Factor (2T Pulse)

1% or less

Output SCH phase

Based upon RS-170A/CCIR R.624-3

Sampling frequency

48kHz (Syncronized with video)

Quantization

20 bit/sample

Wow & flutter

Below measurable level

Headrooms

20/18/16/12 dB selectable

Emphasis (ON/OFF selectable in REC mode)

T1=50 µs, T2=15 µs (on/off selectable in recording mode)

A/D quantization

20 bit/sample

  D/A quantization

20 bit/sample

Frequency response

20 Hz to 20kHz +0.5 dB/-1.0 dB (0 dB at 1kHz)

Dynamic range

More than 90 dB (at 1kHz, emphasis ON)

Distortion

Less than 0.08% (at 1kHz, emphasis ON, reference level)

Crosstalk

Less than -80 dB (at 1kHz, between any two channels)

Frequency response

100 Hz to 10kHz ±3 dB

S/N ratio

More than 45 dB (at 3% distortion level)

Distortion

Less than 2% (T.H.D. at 1kHz, reference level)

Wow & flutter

Less than 0.2%

Erase ratio

More than 60 dB