Sony LMD2451W

Introducing Sony’s latest mid-range 24-inch Full-HD LUMA series professional monitor, LMD-2451W, featuring proven ChromaTRU technology, 3G-SDI processing, newly improved wide viewing angle CCFL panel and a host of unique features.

Please contact us for pricing sales@videocraft.com.au

·	24-inch WUXGA (1920 x 1200 pixels)
·	Multi-format signal support - up to 3G SDI input
·	ChromaTRU color processing for accurate gamma and stable white balance
·	Sophisticated I/P conversion
·	Excellent brightness and contrast
·	Extremely wide viewing angle
·	Advanced marker settings
·	Colour temperature
·	Selectable scan size and aspect ratio
·	Three-colour tally
·	Smart APA (auto pixel alignment) for computer input
·	Parallel and serial remote control
·	Stereo audio monitoring
·	Protected controls
·	Closed-Caption decoder
·	VESA mounting (100 x 100 mm spacing)
·	WFM and audio level meter windows
·	Picture by picture mode
·	H/V delay function
·	24V DC operation
·	Setup level for analog component and NTSC signal
·	Blue-Only mode
·	Monochrome mode
·	Auto Chroma/Phase setup
·	DVI-D input
·	Power-saving function (computer input only)
·	DDC-2B

Picture Performance
Type	A-Si TFT Active Matrix LCD
Resolution	1920 x1200 pixels (WUXGA)
Picture Size (H x W)	(Viewable area) (Diagonal) Approx. 518.4 x 324.0 mm, Approx. 613.2 mm
Aspect	16:10
Colours	Approx. 16.7 million colours
Viewing Angle	89 degrees/89 degrees/89 degrees/89 degrees (typical) (up/down/left/right contrast>10:1)

Input
Standard
Composite	BNC x 1, 1.0 VP-p +/-3dB sync negative
Y/C	4pin Mini DIN x 1 Y: 1.0 Vp-p +/- 3dB sync negative, C: 0.286 Vp-p +/- 3dB (NTSC burst signal level), 0.3 Vp-p +/- 3dB (PAL burst signal
RGB, Component	BNC x 3 RGB : 0.7 Vp-p +/- 3dB (Sync On Green, 0.3 Vp-p sync negative)>br>Component : 0.7 Vp-p +/- 3dB (75% chrominance standard color bar signal)
External Sync	BNC x 1 0.3 to 4.0 Vp-p +/- bipolarity ternary or negative polarity binary
Audio	RCA phono pin x 2 (L, R) -5 dBu 47 k ohms or higher
HD15	D-sub 15 pin x 1, R/G/B: 0.7 Vp-p sync positive (Sync On Green, 0.3 Vp-p sync negative) Sync : Total level (polarity free, H/V separate and composite sync) Plug & Play function : corresponds to DDC-2B
DVI-D	TMDS signal link (fV: 50.0 to 85.1 Hz, fH:31.5 to 77.0 kHz, Dot Clock:25.175 - 162.000 MHz)
Parallel remote	Modular connector 8 pin x 1 (pin assignment at users allocation)
Serial remote (LAN)	D-sub 9-pin (RS232C) x 1, RJ-45 modular connector (ETHERNET) x 1 (10BASE-T/100BASE-TX)
DC in	XLR type 4pin x 1 DC24V (output impedance 0.005 ohms or less)

Optional
Option input slot	2 slots (for HD-SDI, SDI capability and extra analog I/Os)

Output
Standard
Composite	BNC x 1, Loop-though, with 75 ohms automatic termination
Y/C	4pin mini DIN x 1 Loop-though, with 75 ohms automatic termination
RGB, Component	BNC x 3, Loop-though, with with 75 ohms automatic termination
External Sync	BNC x 1, Loop-though, with 75 ohms automatic termination
Audio monitor out	RCA phono pin type x 2 (L, R)
Speaker (Built-in)	1.0 W + 1.0 W (stereo)

General
Power Requirement	AC100 V to 240 V 50/60 Hz 0.6 A to 1.1 A, DC2 4V 4.6 A
Power Consumption	Maximum Approx. 130 W (with 2 x BKM-229X)
Operating Temperature	0 to 35 degrees (recommended operation temperature 20 to 30 degrees)
Operating Humidity	30 to 85% (No condensation)
Storage & Transport Temperature	-20 to 60 degrees
Storage & Transport Humidity	0 to 90 %
Operating/Storage/Trans. Pressure	700 to 1060 hPa
Dimensions (W x H x D)	602.4 x 497.9 x 269.9 mm, without stand 602.4 x 386.2 x 110.0 mm
Display Stand (W x H x D)	320.0 x 361.5 x 269.9 mm
Mass	With two option boards Approx. 11.4 kg with BKM-229X x 2 Without option boards Approx. 11.0 kg
Supplied Accessories	AC power cord, AC plug holder, Operating Instructions, CD-ROM, Warranty Card, Using the CD-ROM Manual