Sound Devices 302 Field Mixer

Small, Powerful Audio Mixer for ENG

$1980.00 Inc GST

Lundahl transformer-balanced mic or line level inputs on XLR connectors
Continuously adjustable input trim
Two-position high-pass filter
Pan switches
Limiters on inputs and outputs
Stereo and MS linking of channel 1 and 2
Phantom (48 V or 12 V) or 'T' microphone powering selected per channel
Solo (PFL) channel monitoring in headphones
Peak limiters per channel
Tape level output on TA3 locking connectors
Active-balanced line/tape/mic level outputs on XLR connectors
Return input for monitoring
Channel 4/5 input option
Sunlight-viewable LED meters with proprietary software selected ballistics
On-board MS stereo matrix
Push pots for setup features to keep the front panel clutter-free
Durable extruded aluminum chassis
Weight less than 1 kg with batteries
Powered by three AA batteries or external 5 - 18 VDC

Frequency Response:
20 Hz - 30 kHz, +0.2, -0.5 dB,
-1 dB @ 5 Hz and 50 kHz typical

Equivalent Input Noise:
-126 dBu (-128 dBV) maximum
(22 Hz - 22 kHz bandwidth, flat filter, trim control fully up)

Input Clipping Level:
0 dBu minimum (trim control fully down)

Line Output Clipping Level (1% THD):
20 dBu minimum, 18 dBu minimum with 600 ohm load

Dynamic Range:
115 dB minimum (trim fully down)

THD + Noise:
0.007% typical (1 kHz, +4 dBu at Line out), 0.009 max (50 Hz to 20 kHz, +18 dBu at line out, fader fully up)

Output Noise:
-100 dBu (-102 dBV) maximum (22 Hz - 22 kHz bandwidth, flat filter, master gain fully up, faders fully down)

L/R Gain Matching:
+/- 0.1 dB (Mic In to Line Out)

Metering:
40-segment, sunlight-viewable
Selectable peak, VU, or peak (with or without peak hold) + VU ballistics

High-Pass Filters:
Switchable 80 Hz or 160 Hz, 12 dB/oct, silent activation

Mic Powering (each mic selectable):
none, 12 V phantom, 48 V phantom, 12 V T-power, selected per mic input

Input Limiters:
+18 dBu threshold, 20:1 limiting ratio, 1 mS attack time, 200 mS release time.

Output Limiters:
Affects the outputs of the mixer.
Threshold selectable from +4 dBu to +20 dBu, 1 dB steps, 20:1 limiting ratio, 1 mS attack time, 200 mS release time

Power supply:
Internal ±16 V (bi-polar) regulated audio rails, 2.4 - 6 V range internal batteries, isolated (floating) external DC input jack, 5-18 V
locking 4-pin Hirose connector, pin-4 = (+), pin-1 = (-)

Temperature:
Operating: -20°C to 60°C, 0 to 95% relative humidity; (non-condensing), storage: -40°C to 85°C

Weight:
0.85 kg, (1.8 lbs) unpackaged with three alkaline AA batteries

Dimensions:
47 mm x 214 mm x 114 mm (H x W x D), 1.8' x 8.4' x 4.5'