Blackmagic Design GPI and Tally Interface
25 pin D-type connector providing 8 opto isolated inputs and 8 relay contact closure outputs.
Optical isolators triggered by connection to ground. Max 5V at 14mA.
Mechanical relay contact closure to ground. Max 30V at 1A.
10/100 BaseT with loop through for connecting to other ethernet enabled equipment.
Configured via ATEM Switcher Utility.
Internal Software Upgrade
Firmware built into software driver. Loaded at system startup or via updater software.
0° to 40° C (32° to 104° F)
-20 - 60 degrees celsius
Up to 95%
What's In The Box
- GPI & Tally Interface
- Software CD
- Power Supply