The Sony ECMVG1 Microphone is a perfect fit for an HVRZ1P, it also includes all the accessories you will need to mount it to the camera and quite a neat wind shield.
In theory yes the RG6 cable is okay to use with the Continue reading →
Yes, a Miller Compass 23 Fluid Head is included in the system, along a set of 3 475 Rubber Feet Pads, 993 Mid-level Spreader, 870 Arrow Soft Case and a Pan Handle.
The numbers on Miller tripods denote the payload capacity in pounds. A PXWFS5K weighs 2.5kg. It works fine on our Continue reading →
The Rode Micon10 Adapter will work with the Continue reading →
The major difference is the payload or DSLR camera and lens weight the gimbal can hold. Continue reading →
The cable length of the Rode SmartLav+ is 1.2 metres
The SBACUS30 Card Reader is backwards compatible, so can be powered by both a USB 3.0 and USB 2.0 connection.
Yes, the Atomos Ninja Blade recorder does come with an adapter for Nikon EN EL-15 batteries
The XF100 Camera has Balanced XLR inputs for professional mics. The DM100 mic is designed for consumer cameras. I would suggest a Sony ECMVG1
This is a PCi-e card so it will fit in to a full size PC. You will need to check if CS6 will see it as a video source, You can always use the free BM software to record. It would, however be best to record on an SxS card in the camera and import it in to CS6 using USB
The HDMI output for the A7S II is 4:2:2 8 bit
There is a lifetime warranty on all Pelican cases.
The Sony ECM673 is phantom powered, which means it gets power from the camera it connects to, and does not use batteries. It has XLR connections, but does not have TRS (3.5mm Mini-j
Both the FREE Ver2.0 System software update and the Continue reading →
The Sennheiser SKP 100 G3-B Plug-On Transmitter does not supply 48V Phantom power. You would need to either use a Shotgun mic with a battery like the <
The tripod has a removable location pin for video cameras. You would not use this for a DSLR or a piece of equipment that does not accommodate a location pin
Yes, the Rode NTG4+ can get phantom power from being connected to a camera or pre-amp. The phantom power does not charge the included internal lithium ion battery. The Battery can b
The Blackmagic Design ATEM Television Studio has the same H.264 encoder as the Video Pro Recorder from Black magic. It will output over USB2 and is designed to be used in conjunctio
The Mbox 2 is not qualified for Pro Tools 12. It may still work but I think mileage may vary. Pro Tools 12 does work without an audio interface that is if you only need it to
We are expecting the Rode RodeLink Digital Wireless Filmmaker Kit to ship from 29 May 2015.
Unfortunately the HXRMC2500 does not have input for additional microphones like the the Rode Videomic. On the plus side it does come with a built-in omni directional stereo microphone that would most likely suit your requirements.
The Promp-It Maxi Teleprompter is merely a reflection glass setup, and requires a screen, commonly the Ipad with an app placed on the base to reflect the scrolling text. The camera
The Panasonic Lumix AG-GH4 Camera is updated to Ver 2.1. AG-YAGH Interface Adaptor is updated to Ver 1.1
Good News. The user updates V2.00 system software for the Sony PXW-X160 has been released.
New features and improvements:Continue reading →
Good News. The user updates V2.00 system software for the Sony PXW-X180 Camcorder and the V1.31 network function software have been released. NOTE:Continue reading →
The playback on screen feature was not enabled in the previous firmware release. The Shogun feature release schedule can be downloaded Continue reading →
You will need a display device like an SDI monitor or an HDMI TV to test whether the Continue reading →
If you have the EF Mount version of the Continue reading →
Hi James. Unfortunately one lapel microphone can be used per Sony Hybrid Digital Lavalier Wireless Mic System. You can only hear one transmitter on each receiver.
Sony has just announced that to record in the XAVC codec on the Continue reading →
Sony has recently become aware that when recorded in XAVC mode, the Left
and Right audio channels are recorded swapped around.
Sony is offering a system software updat
Videocraft Blackmagic Intensity Shuttle USB 3.0 Compatibility Information Guide
Blackmagic Design Intensity Shuttle USB
Yes, the Panasonic AG-HMC82EN is the PAL version of the camera. Panasonic models with an E or EN suffix are PAL based. Those with an A, G or PJ suffix are NTSC models.
No, the GP073 Hero 3 Cap + Doors do not fit the Hero 3+ cameras due to the redesigned waterproof housing and new lens.
The dual pixel auto focus is a paid-for optional upgrade for the C100. The C100 comes standard with one-shot autofocus, or continuous focus on cameras with firmware 1.0.2
No, the JH3 does not have the capbility to payback material shot in the HDCAM-SR format.
The GH4 requires a new class of SD card to record 4K reliably, as indicated on the chart below. The card needs to have a speed rating of UHS3, which is
Yes, after consulting witrh Sony, their engineer said ti should work as the F65 uses the same 20 pin analogue connector used on the HXC/PDW cameras.
The Sachtler 25P can handle a weight range of 8-35kgs. A typical F65 camera package weighs around 12-15kg and as much as 25kgs depending on lens weight and size. However, the abilit
Yes, the Sony LAFZB1 will provide power to either lens. In addition, the HJ22 will pass ALAC information to the F5/F55, allowing compensation of chromatic aberration, but we do not know if the J11 has the same capability.
The Sony HXRMC1500P weighs 2.7kg without a battery or tape and it can be mounted to a tripod using the 1/4"-20 taped hole on the bottom of the camera.
No, the Pocket Camera does not include a lens. A range of Micro 4/3 lenses can be found here:
Yes, ProTools 11.1 now supports Windows 8.1.
The LIvestream Broadcaster will work with any 4G capable USB modem.
The AG-AC90EN comes with one 5400mAh battery, model number CGA-D54S/1H.
Yes, the Atomos Ninja Blade would be compatible with the Blackmagic Pocket Camera. The Pocket Camera can record in the same ProRes 422(HQ) codec as the Ninja, but can record lossles
Cases come in two main types - soft case and hard case.
Soft cases are generally light and compact. They typically come in two styles: Shoulder bag or backpack. We sell the
The Teradek Bolt Pro receiver or transmitter can be powered from a number of different options via the 2-pin Lemo power connectors.
The receiver is shipped with a 2-pin Lemo
The Ninja2 can be used in conjunction with the SxS cards of the PMW200 to dual record and backup your footage. Alternatively, you can use the Ninja2 to record a higher quality signa
Yes, you can add an HDMI input to the Atomos Samurai using the HDMI to SDI Connect converter. This would allow connection of a Canon 5D Mark III that is running Firmware 1.2.1 or higher. This firmware enabled the 5D to output an uncompressed HDMI signal.
The camera is supplied with one CGA-D54s/1H battery which is rated for 39Wh. The camera has a draw of 12.9W, so the battery should last about 3 hours in ideal conditions. However, b
Blackmagic are currently testing several new laptops for use with the Pocket Ultrascope. The following laptops have been verified by end-users to work with their USB 3.0
The flange of the donut fits around the circumference of the lens, creating a light tight seal as can be seen in the photo below:
Yes, the Teradek Bolt can accept SD and HD resolutions up to 1080/60P.
Yes, the WRR861 receiver is compatible with the WRR860 transmitter.
Yes, it is possible to buy replacement foam for all Pelican cases, as well as other inserts like the padded divider sets. Check the essential accessories section to see what options are available for this product.
At this stage the BMCC 2.5K camera can not record interlaced frame rates. The 2.5K camera only records the progressive frame rates of 23.98p, 24p, 25p, 29.97p, and 30p.
The full specs of the battery are 7.4V, 800mAh, 5.92Wh. The direct replacement is a NIkon EN-EL20
No, Atomos do not include Hard Drives with the Ninja or Samurai kits. A full list of recommended drives can be found on the Atoms website, here: http://www.atomos.com/discovery-what-drives/
Yes, Videocraft have the LAFZB1 adaptor available for demo, rent and sale. Please contact your local Videocraft office for more info.
The Cineroid range of lights use the same L-series battery as the HXRMC1500P and many other Sony cameras, making them the ideal choice for on-camera lighting. The Cineroid light com
Yes, the DJI Phantom includes a remote controller. The Phantom is ready to fly the moment you unpack it. Just attach propellors, charge the LiPo and install 4X AA batteries in the remote control and start flying.
The answer can be yes or no depending on where it is operated and for what purpose. The best resource will be the Civil Aviation and Safety Authority website, specificially this sec
No, the internal battery cannot be removed for charging. If a longer running time is required, there are many 3rd party battery adaptors and powering solutions available from companies such as IDX.
According to the spec sheet, the 4K camera will only shoot 1920X1080/50 as interlaced footage.
Yes, the BMCC 4K accepts balanced mic or line level analogue audio. Balanced analogue audio is how most video cameras accept an audio signal. Instead of the typical XLR connectors,
Yes, the Ninja2 can be used with your Sony V1P using the camera's HDMI connection.
Canon uses a proprietary format to encode the RAW signal called .rtf The .rtf format is then processed using the Cinema RAW Development (CRD) program supplied by Canon. C
AVCHD FX (24Mbps) 1920x1080/50i, AVCHD FH (17Mbps) 1920x1080/50i, AVCHD HQ (9Mbps) 1440x1080/50i, AVCHD LP (5Mbps) 1440x1080/50i, AVCHD FX (24Mbps) 1920x1080/25p, AVCHD FH (17Mbps) 1
No the HXRNX5 does not have an interchangeable lens. However you can get lens adaptors such as the Sony VCL-HG0872K 0.8x wide conversion lens.
A new feature of the HXR-NX5P is Active SteadyShot. This useful feature effectively reduces hand-held camera shake.
The Canon C500 cannot record the 4K signal internally to the Compact Flash cards. An external recorder available from companies such as Convergent Design, Codex and AJA is required to record the 4K signal.
Three 1/3” Exmor™ CMOS Sensors with ClearVid array
The lens mount is fixed and cannot be changed between Canon EF or PL mounts by the user.
The PMW-F3 is part of Sony's highly successful XDCAM EX product family, which supports a high speed nonlinear workflow. With XDCAM EX, recordings are made as data files in the MP4 fo
In addition to HD recording, high-quality audio is an equally significant feature in the XDCAM EX system. The PMW-F3 camcorder records and plays back high-quality, two-channel 16-bit, 48-kHz linear PCM uncompressed audio.