Portable setup

The Teradek Bond is a small and portable bonded streaming kit giving you extreme flexibility for seamless integration with existing workflows, reducing setup times on live event productions and remote locations.

Reliable network connection

The Teradek Bond is designed to aggregate Ethernet, WiFi and up to 5 USB cell modems to create a single, robust pipeline for delivering video from point to point. The combination of several network connections allows broadcasters to reinforce their video by sending traffic over multiple routes, repackaging at the destination with rock-solid dependability ensuring that the live stream runs continuously and smoothly throughout the broadcast.

Low cost video streaming solution

Broadcasting from the field or for a live event, using traditional video transport equipment like satellites and ENG trucks or even hard-wired internet connections from convention centres can cost an arm and a leg to use. They also require more personnel and time to get that equipment out to location. The Teradek Bond offers a lost-cost alternative to these situations.

Video Input
HD-SDI, SD-SDI: BNC

Supported Resolutions
1080i 50/59.94/60
1080p 23.98/24/25/30
1080PsF 23.98/24/25
720p 50/59.94/60
576p (HDMI) / 576i (HD-SDI)
480p (HDMI) / 480i (HD-SDI)

Video CODEC
Compression Algorithm: Baseline, Main and High Profile H.264
Main and Baseline profiles
Bit Rate: 250 Kbps to 10 Mbps
Built-in Video Scaler and Deinterlacer

Video Streaming Support
Network Protocols: TCP/IP, UDP, HTTP, DHCP, NTP, SSL, IGMP>
Transport Protocols: RTP, RTSP, MPEG-TS**

Audio
Audio Compression: AAC-LC, MPEG Layer 2
Embedded Audio Input
Analog Line or Mic in, adjustable gain
Headphone output, adjustable volume

Physical
Dimensions: 2.5"W x 3.5"D x 1.5"H
Weight: 12oz

Interfaces
Feature-rich WebUI for configuration and control
OLED LCD Display with joystick Navigation buttons
On/Off and Reset Switch
Micro SD
Six Powered USB 2.0 host ports

Network
Ethernet: 10/100BASE-T
WiFi: Dual Band 802.11 a/b/g/n MiMO
Bonded USB Modem support

Power
2 Pin Lemo Power input
Nominal Power Consumption: 3W + 2.5W (max) per USB device
Power Input: 6-28V DC

Kit includes:

1 x Teradek Bond (in Pelican case with AC PSU)
1 x Powertap cable (For on camera powering)
5 x Dongles (4x TLS, 1x OPT)  -4GB Data included (Value $60)
1 x Teradek Cube 355 HD SDI Decoder

1 x  Access to Teradek Core Cloud management and distribution 

Note: After 4GB data, charged at $15 per GB