0Item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Rode SC6-L Mobile Interview Kit with IOS Interface & 2 SmartLav+ Microphones

CODE: ROD-SC6LKIT

Quick Overview

Featured highlights:

  • Includes SC6-L Mobile Interface
  • 2 x 3.5mm TRRS Inputs for Microphones
  • 1 x 3.5mm Headphone Out for Monitoring
  • Lightning Connector for iOS Devices
  • 24-Bit / 48 kHz Recording
  • Includes 2 smartLav+ Microphones
  • Includes Lav Clips and Windshields
  • Includes Storage Pouch

Version: SC6-L Interface | SC6-L Interface + 2 X Smartlav+

Note: The two microphone inputs will be recorded to the same channel.

Buy This Product

RRP $329.00 inc GST

Special Price $231.00 inc GST

Usually leaves warehouse in 5-7 business days

Ask your own question

Details

The Rode SC6-L Mobile Interview Kit includes the SC6-L Mobile Interface, two SmartLav+ lapel microphones, Foam Pop Shield, Mic Clip and Small Pouch. The SC6-L interface facilitates the recording of 24-bit / 48 kHz broadcast-quality audio, giving you two TRRS inputs for the microphones, a 3.5mm headphone jack, and a lightning connector for your iOS device. The microphones record two interview subjects at a time, and the accessories allow you to affix the mics, fight against vocal plosives, and store the mics for later use. With the Rode SC6-L Mobile Interview Kit, you'll have everything you need to record audio from two interview subjects straight into your iOS device, doing so at broadcast quality.

SC6-L Mobile Interface for iOS Devices and Compatible Microphones
Frequency Range 20 Hz to 20 kHz
Connections 2 x 3.5 mm TRRS microphone inputs
1 x 3.5 mm headphone output
1 x Lightning connector
I/O 2x2, simultaneous
Bit Depth 24-bit
Sample Rates 44.1 / 48 kHz
Power Bus-powered
Material PC and ABS plastic
Dimensions 0.8 x 1.6 x 0.4" / 20.2 x 40.0 x 11.0 mm
Weight 0.6 oz / 16.0 g
smartLav+ Lavalier Condenser Microphone for Smartphones
Acoustic Principle Pressure gradient
Active Electronics JFET
Capsule 0.10" / 2.54 mm
Polar Pattern Omnidirectional
Address Type End
Frequency Range 60 Hz to 18 kHz
Output Impedance 3 kOhms Typical
Signal to Noise Ratio 67 dB
Maximum SPL 110 dB SPL (@ 1 kHz, 1% THD into 1 kOhm load)
Maximum Output Level 189.0 dBu (@ 1 kHz, 1% THD into 1 kOhm load)
Sensitivity -35 dB (17.8 mV @ 94 dB SPL)
Equivalent Noise Level 27 dB-A
Connector TRRS
Maximum Output 189 mV
Dynamic Range 83 dB typical
Dimensions 46.5 x 0.18 x 0.18" / 1180 x 4.5 x 4.5 mm, mic and cable
Weight 0.211 oz / 6.00 g
SC6-L Mobile Interface for iOS Devices and Compatible Microphones

2 x smartLav+ Lavalier Condenser Microphone for Smartphones
Foam Pop Shield
Mic Clip
Small Pouch

Questions + Answers About Videocraft Products

Select a product you would like to know more about. We encourage you to learn about our products to help you.

Ask A Question

* Required Fields

  1. Be the first to review this product

Write Your Own Review

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Price
Value
Quality

Details

The Rode SC6-L Mobile Interview Kit includes the SC6-L Mobile Interface, two SmartLav+ lapel microphones, Foam Pop Shield, Mic Clip and Small Pouch. The SC6-L interface facilitates the recording of 24-bit / 48 kHz broadcast-quality audio, giving you two TRRS inputs for the microphones, a 3.5mm headphone jack, and a lightning connector for your iOS device. The microphones record two interview subjects at a time, and the accessories allow you to affix the mics, fight against vocal plosives, and store the mics for later use. With the Rode SC6-L Mobile Interview Kit, you'll have everything you need to record audio from two interview subjects straight into your iOS device, doing so at broadcast quality.

SC6-L Mobile Interface for iOS Devices and Compatible Microphones
Frequency Range 20 Hz to 20 kHz
Connections 2 x 3.5 mm TRRS microphone inputs
1 x 3.5 mm headphone output
1 x Lightning connector
I/O 2x2, simultaneous
Bit Depth 24-bit
Sample Rates 44.1 / 48 kHz
Power Bus-powered
Material PC and ABS plastic
Dimensions 0.8 x 1.6 x 0.4" / 20.2 x 40.0 x 11.0 mm
Weight 0.6 oz / 16.0 g
smartLav+ Lavalier Condenser Microphone for Smartphones
Acoustic Principle Pressure gradient
Active Electronics JFET
Capsule 0.10" / 2.54 mm
Polar Pattern Omnidirectional
Address Type End
Frequency Range 60 Hz to 18 kHz
Output Impedance 3 kOhms Typical
Signal to Noise Ratio 67 dB
Maximum SPL 110 dB SPL (@ 1 kHz, 1% THD into 1 kOhm load)
Maximum Output Level 189.0 dBu (@ 1 kHz, 1% THD into 1 kOhm load)
Sensitivity -35 dB (17.8 mV @ 94 dB SPL)
Equivalent Noise Level 27 dB-A
Connector TRRS
Maximum Output 189 mV
Dynamic Range 83 dB typical
Dimensions 46.5 x 0.18 x 0.18" / 1180 x 4.5 x 4.5 mm, mic and cable
Weight 0.211 oz / 6.00 g
SC6-L Mobile Interface for iOS Devices and Compatible Microphones

2 x smartLav+ Lavalier Condenser Microphone for Smartphones
Foam Pop Shield
Mic Clip
Small Pouch

Questions + Answers About Videocraft Products

Select a product you would like to know more about. We encourage you to learn about our products to help you.

Ask A Question

* Required Fields

  1. Be the first to review this product

Write Your Own Review

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Price
Value
Quality

Customers also considered

Top