Default welcome msg!
Sony TRIMASTER EL technology combines the ultimate performance of Sony OLED display with the highly sophisticated TRIMASTER technology to provide the highest level of picture performance:
Sony's Super Top Emission™ technology has a micro-cavity structure which incorporates colour filters. The micro-cavity structure uses an optical resonance effect to enhance colour purity and improve light-emission efficiency. In addition, the colour filter of each RGB further enhances the colour purity of emitted light, and reduces ambient light reflection.
High-precision signal processing engine has been developed to fulfil the reference monitor criteria and is optimized to maximize OLED panel performance. This engine incorporates 12-bit output accuracy at each process, and provides both a high quality I/P conversion algorithm and a highly accurate colour management system.
The BVM-E170 monitor can accept almost any SD or HD video format, both analogue and digital, and variable computer signals up to 1920 × 1080. In addition to the standard inputs, four option board slots are offered to configure this monitor according to different user needs.
This monitor is equipped as standard with two 3G/HD/SD-SDI inputs, an HDMI (with HDCP) input and a Displayport* for future expansion. In addition, four option ports are available.
* DisplayPort input will be supported from monitor software version 1.1 or later.
The monitor can accept up to four optional video input boards simultaneously. Available formats include analogue, composite, Y/C, components, RGB and digital 3G/HD/SD SDI.
By installing the optional BKM-250TG 3G/HD-SDI input adaptor*, the BVM-E170 can support a variety of 3D signal analyzes. The 3D signals* are displayed in 2D mode.
The colour temperature and white balance of BVM-E and F Series monitors can be automatically adjusted by the Auto White Balance function using specified colour temperature probes, such as the Konica Minolta CA-210, CS-200, DK-Technologies PM5639/06, and X-Rite i1 (Eye-One) Pro.
The BVM-E170 monitor uses a sophisticated I/P conversion technique that keeps artefacts that are often seen in flat panel displays to a minimum such as edge jaggedness, conversion errors, etc.
The BVM-E170 display engine ensures a picture delay that is less than one field.
Every BVM-E170 monitor is carefully calibrated at the factory on an individual basis, providing a high level of accuracy and stability for characteristics such as gamma and uniformity.
Using a colour feedback system, the BVM-E170 monitor achieves the stability required for Broadcast critical monitoring applications.
Faithfully reproduces interlaced signals, emulating CRT monitors.
The unique Picture
BVM-E170 master monitor incorporates a Gamut Error Display function that detects irregular signal input.
BVM-E170 master monitor incorporates gamma tables to reproduce images captured using S-LOG Gamma technology. S-LOG gamma is a technique used in Sony's digital cinematography cameras that allows the full latitude of the camera CCD to be maintained throughout the production chain.
The 2048 Image Slide function of the BVM-E170 allows 2K resolution (2048 x 1080 pixels) images to be mapped, pixel-to-pixel, on the full-HD (1920 x 1080 pixels) panel without picture degradation.
The HD Frame Capture function of the BVM-F Series allows a picture frame from the 3G-SDI and HD-SDI input to be captured and saved as a picture file on a Memory Stick™ media.
A separate control unit BKM-16R is available for the BVM-E170. It is equipped with a Memory Stick socket enables users to download and save all monitor set-ups such as input channel configuration, control preset adjustments, white balance settings and maintenance parameters.
Multiple monitors can be easily managed by a single control unit BKM-16R via an Ethernet connection.
Picture Performance
Panel | OLED panel |
---|---|
Picture Size (Diagonal) | 419.7 mm 16 1/2 inches |
Effective Picture Size (H x V) | 365.8 x 205.7 mm 14 1/2 x 8 1/8 inches |
Resolution (H x V) | 1920 x 1080 pixels (Full HD) |
Aspect | 16:9 |
Pixel Efficiency | 0.9999 |
Panel Drive | RGB 10-bit |
Panel Frame Rate | 48 Hz, 50 Hz, 60 Hz, 72 Hz, 75 Hz *1 |
Viewing Angle (Panel Specification) | 89°/89°/89°/89° (typical) (up/down/left/right contrast > 10:1) |
Normal Scan | 0% scan |
Native Scan | Mapping the pixels of the signal to the panel to one-to-one mode, or displaying an SD signal of nonsquare pixels (the number of H pixels of the signal system is 720 or 1440) or a 640 × 480 SD signal of HDMI video by scaling processing of doubling for the V direction and correct aspect ratiofor the H direction and also optimizing and sidplaying a picture by modifying the aperture coefficient value, filter coefficient value, etc. |
Under Scan | 3% under scan |
Over Scan | Mask of 5% over scan portion in the normal scan |
Color Temperature | D55, D61, D65, D93, D-Cine *2 , User |
Standard Luminance | 100 cd/m2 (Preset1 to Preset5) 48 cd/m2 (Preset (D-Cine)) (100% white signal input) |
Color Space (Color Gamut) | ITU-R BT.709, EBU, SMPTE-C, D-Cine *3 , E170 Native *4 , S-GAMUT *5 |
Warm-up Time | Approx. 30 minutes |
Input
SDI Input | BNC (x2) Input impedance: 75 Ω unbalanced Sampling frequency 3G-SDI: - Y/Cb/Cr (4:2:2): 148.5 MHz/74.25 MHz/74.25 MHz - Y/Cb/Cr (4:4:4): 148.5 MHz/148.5 MHz/148.5 MHz - G/B/R (4:4:4): 148.5 MHz/148.5 MHz/148.5 MHz HD-SDI: - Y/Cb/Cr (4:2:2): 74.25 MHz/37.125 MHz/37.125 MHz SD-SDI: - Y/Cb/Cr (4:2:2): 13.5 MHz/6.75 MHz/6.75 MHz Quantization 3G-SDI: 10bit/sample, 12 bit/sample HD-SDI: 10bit/sample SD-SDI: 10bit/sample |
---|---|
HDMI Input | HDMI (x1) (HDCP correspondence, Deep Color correspondence) |
DisplayPort | DisplayPort connector (x1) *6 |
Option Port | Four (4) ports |
Parallel Remote | D-sub 9-pin (female) (x1) |
Serial Remote (LAN) | RJ-45 (x1) (Ethernet, 10BASE-T/100BASE-TX) |
DC Input | XLR-type 3-pin (male) (x1), 24V DC (output impedance 0.05 Ω or less) |
Output
SDI Output | BNC (x1) (monitor output) *7 Output signal amplitude: 800 mVp-p±10% Output impedance: 75 Ω unbalanced Transmission distance 3G-SDI: 70 m max. *8 HD-SDI: 100 m max. *8 SD-SDI: 200 m max. *9 |
---|---|
DC 5 V Output | Circle 4-pin (female) (x1) |
General
Power Requirements | 100 V to 240 V AC, 1.2 A to 0.7 A, 50/60 Hz 24V to 28V DC, 4.5A to 3.9 A |
---|---|
Power Consumption | Approx. 110 W (AC power supply), 100 W (DC power supply) (max.) Approx. 60 W (AC power supply), 60 W (DC power supply) (average power consumption in the default status) |
Inrush Current | (1) Maximum possible inrush current at initial switch-on (Voltage changes caused by manual switching): 55 A peak, 15 A r.m.s. (240V AC) (2) Inrush current after a mains interruption of five seconds (Voltage changes caused at zero-crossing): 36 A peak, 7 A r.m.s. (240V AC) |
Operating Temperature | 0°C to 35°C (Recommended: 20°C to 30°C) 32°F to 95°F (Recommended: 68°F to 86°F) |
Operating Humidity | 0% to 90% (no condensation) |
Storage/Transport Temperature | -20°C to +60°C -4°F to +140°F |
Storage/Transport Humidity | 0% to 90% |
Operating/Storage/Transport Pressure | 700 hPa to 1060 hPa |
Dimensions (W x H x D) *10 | 436.0 x 282.4 (266.4)*5 x 214.7 mm 17 1/4 x 11 1/4 (10 1/2)*5 x 8 1/2 inches |
Mass | Approx. 8.6 kg Approx. 18 lb 15 oz |
Supplied Accessories | AC power cord (1) AC plug holder (1) Rack mount bracket (Left, right, each 1) Rack mount attachement screws (4) Operation Manual (Japanese, English, each 1) CD-ROM (1) Using the CD-ROM Manual (1) |
Optional Accessories | BKM-16R Monitor Control Unit BKM-39H Controller Attachment Stand BKM-37H Controller Attachment Stand SMF-700 Monitor Interface Cable BKM-220D SDI 4:2:2 Input Adaptor (with serial number 2100001 or higher) BKM-227W NTSC/PAL Input Adaptor BKM-229X Analog Component Input Adaptor (with serial number 2200001or higher) BKM-243HS HD/D1-SDI Input Adaptor (with serial number 2108355 or higher) BKM-244CC HD/SD-SDI Closed Caption Adaptor BKM-250TG 3G/HD/SD-SDI Input Adaptor (with serial number 7300001or higher) |
Notes
Note |
*[1] 48 Hz, 60 Hz and 72 Hz are also compatible with a frame rate of 1/1.001. |
---|---|
Note |
*[2] D-Cine: x = 0.314, y = 0.351 |
Note |
*[3] Chromaticity point of SMPTE RP 431-2 is not covered in full. |
Note |
*[4] The BVM-E170 individual chromaticity points. The widest color space setting of the signal is reproduced by the BVM-E170. R (x = 0.681, y = 0.319)/G (x = 0.189, y = 0.724)/B (x= 0.141, y= 0.051) (typical) |
Note |
*[5] For displaying the color gamut of the wide color space mode S-GAMUT, which is available for the F23 or F35 Digital Cinematography Camera. |
Note |
*[6] The DisplayPort input is available from V1.1. |
Note |
*[7] The signal from the monitor output connector does not satisfy the online signal specifications. |
Note |
*[8] When using 5C-FB coaxial cables (Fujikura or equivalent). |
Note |
*[9] When using 5C-2V coaxial cables (Fujikura or equivalent). |
Note |
*[10] The values for dimensions are approximate. |
Select a product you would like to know more about. We encourage you to learn about our products to help you.
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
Sony TRIMASTER EL technology combines the ultimate performance of Sony OLED display with the highly sophisticated TRIMASTER technology to provide the highest level of picture performance:
Sony's Super Top Emission™ technology has a micro-cavity structure which incorporates colour filters. The micro-cavity structure uses an optical resonance effect to enhance colour purity and improve light-emission efficiency. In addition, the colour filter of each RGB further enhances the colour purity of emitted light, and reduces ambient light reflection.
High-precision signal processing engine has been developed to fulfil the reference monitor criteria and is optimized to maximize OLED panel performance. This engine incorporates 12-bit output accuracy at each process, and provides both a high quality I/P conversion algorithm and a highly accurate colour management system.
The BVM-E170 monitor can accept almost any SD or HD video format, both analogue and digital, and variable computer signals up to 1920 × 1080. In addition to the standard inputs, four option board slots are offered to configure this monitor according to different user needs.
This monitor is equipped as standard with two 3G/HD/SD-SDI inputs, an HDMI (with HDCP) input and a Displayport* for future expansion. In addition, four option ports are available.
* DisplayPort input will be supported from monitor software version 1.1 or later.
The monitor can accept up to four optional video input boards simultaneously. Available formats include analogue, composite, Y/C, components, RGB and digital 3G/HD/SD SDI.
By installing the optional BKM-250TG 3G/HD-SDI input adaptor*, the BVM-E170 can support a variety of 3D signal analyzes. The 3D signals* are displayed in 2D mode.
The colour temperature and white balance of BVM-E and F Series monitors can be automatically adjusted by the Auto White Balance function using specified colour temperature probes, such as the Konica Minolta CA-210, CS-200, DK-Technologies PM5639/06, and X-Rite i1 (Eye-One) Pro.
The BVM-E170 monitor uses a sophisticated I/P conversion technique that keeps artefacts that are often seen in flat panel displays to a minimum such as edge jaggedness, conversion errors, etc.
The BVM-E170 display engine ensures a picture delay that is less than one field.
Every BVM-E170 monitor is carefully calibrated at the factory on an individual basis, providing a high level of accuracy and stability for characteristics such as gamma and uniformity.
Using a colour feedback system, the BVM-E170 monitor achieves the stability required for Broadcast critical monitoring applications.
Faithfully reproduces interlaced signals, emulating CRT monitors.
The unique Picture
BVM-E170 master monitor incorporates a Gamut Error Display function that detects irregular signal input.
BVM-E170 master monitor incorporates gamma tables to reproduce images captured using S-LOG Gamma technology. S-LOG gamma is a technique used in Sony's digital cinematography cameras that allows the full latitude of the camera CCD to be maintained throughout the production chain.
The 2048 Image Slide function of the BVM-E170 allows 2K resolution (2048 x 1080 pixels) images to be mapped, pixel-to-pixel, on the full-HD (1920 x 1080 pixels) panel without picture degradation.
The HD Frame Capture function of the BVM-F Series allows a picture frame from the 3G-SDI and HD-SDI input to be captured and saved as a picture file on a Memory Stick™ media.
A separate control unit BKM-16R is available for the BVM-E170. It is equipped with a Memory Stick socket enables users to download and save all monitor set-ups such as input channel configuration, control preset adjustments, white balance settings and maintenance parameters.
Multiple monitors can be easily managed by a single control unit BKM-16R via an Ethernet connection.
Picture Performance
Panel | OLED panel |
---|---|
Picture Size (Diagonal) | 419.7 mm 16 1/2 inches |
Effective Picture Size (H x V) | 365.8 x 205.7 mm 14 1/2 x 8 1/8 inches |
Resolution (H x V) | 1920 x 1080 pixels (Full HD) |
Aspect | 16:9 |
Pixel Efficiency | 0.9999 |
Panel Drive | RGB 10-bit |
Panel Frame Rate | 48 Hz, 50 Hz, 60 Hz, 72 Hz, 75 Hz *1 |
Viewing Angle (Panel Specification) | 89°/89°/89°/89° (typical) (up/down/left/right contrast > 10:1) |
Normal Scan | 0% scan |
Native Scan | Mapping the pixels of the signal to the panel to one-to-one mode, or displaying an SD signal of nonsquare pixels (the number of H pixels of the signal system is 720 or 1440) or a 640 × 480 SD signal of HDMI video by scaling processing of doubling for the V direction and correct aspect ratiofor the H direction and also optimizing and sidplaying a picture by modifying the aperture coefficient value, filter coefficient value, etc. |
Under Scan | 3% under scan |
Over Scan | Mask of 5% over scan portion in the normal scan |
Color Temperature | D55, D61, D65, D93, D-Cine *2 , User |
Standard Luminance | 100 cd/m2 (Preset1 to Preset5) 48 cd/m2 (Preset (D-Cine)) (100% white signal input) |
Color Space (Color Gamut) | ITU-R BT.709, EBU, SMPTE-C, D-Cine *3 , E170 Native *4 , S-GAMUT *5 |
Warm-up Time | Approx. 30 minutes |
Input
SDI Input | BNC (x2) Input impedance: 75 Ω unbalanced Sampling frequency 3G-SDI: - Y/Cb/Cr (4:2:2): 148.5 MHz/74.25 MHz/74.25 MHz - Y/Cb/Cr (4:4:4): 148.5 MHz/148.5 MHz/148.5 MHz - G/B/R (4:4:4): 148.5 MHz/148.5 MHz/148.5 MHz HD-SDI: - Y/Cb/Cr (4:2:2): 74.25 MHz/37.125 MHz/37.125 MHz SD-SDI: - Y/Cb/Cr (4:2:2): 13.5 MHz/6.75 MHz/6.75 MHz Quantization 3G-SDI: 10bit/sample, 12 bit/sample HD-SDI: 10bit/sample SD-SDI: 10bit/sample |
---|---|
HDMI Input | HDMI (x1) (HDCP correspondence, Deep Color correspondence) |
DisplayPort | DisplayPort connector (x1) *6 |
Option Port | Four (4) ports |
Parallel Remote | D-sub 9-pin (female) (x1) |
Serial Remote (LAN) | RJ-45 (x1) (Ethernet, 10BASE-T/100BASE-TX) |
DC Input | XLR-type 3-pin (male) (x1), 24V DC (output impedance 0.05 Ω or less) |
Output
SDI Output | BNC (x1) (monitor output) *7 Output signal amplitude: 800 mVp-p±10% Output impedance: 75 Ω unbalanced Transmission distance 3G-SDI: 70 m max. *8 HD-SDI: 100 m max. *8 SD-SDI: 200 m max. *9 |
---|---|
DC 5 V Output | Circle 4-pin (female) (x1) |
General
Power Requirements | 100 V to 240 V AC, 1.2 A to 0.7 A, 50/60 Hz 24V to 28V DC, 4.5A to 3.9 A |
---|---|
Power Consumption | Approx. 110 W (AC power supply), 100 W (DC power supply) (max.) Approx. 60 W (AC power supply), 60 W (DC power supply) (average power consumption in the default status) |
Inrush Current | (1) Maximum possible inrush current at initial switch-on (Voltage changes caused by manual switching): 55 A peak, 15 A r.m.s. (240V AC) (2) Inrush current after a mains interruption of five seconds (Voltage changes caused at zero-crossing): 36 A peak, 7 A r.m.s. (240V AC) |
Operating Temperature | 0°C to 35°C (Recommended: 20°C to 30°C) 32°F to 95°F (Recommended: 68°F to 86°F) |
Operating Humidity | 0% to 90% (no condensation) |
Storage/Transport Temperature | -20°C to +60°C -4°F to +140°F |
Storage/Transport Humidity | 0% to 90% |
Operating/Storage/Transport Pressure | 700 hPa to 1060 hPa |
Dimensions (W x H x D) *10 | 436.0 x 282.4 (266.4)*5 x 214.7 mm 17 1/4 x 11 1/4 (10 1/2)*5 x 8 1/2 inches |
Mass | Approx. 8.6 kg Approx. 18 lb 15 oz |
Supplied Accessories | AC power cord (1) AC plug holder (1) Rack mount bracket (Left, right, each 1) Rack mount attachement screws (4) Operation Manual (Japanese, English, each 1) CD-ROM (1) Using the CD-ROM Manual (1) |
Optional Accessories | BKM-16R Monitor Control Unit BKM-39H Controller Attachment Stand BKM-37H Controller Attachment Stand SMF-700 Monitor Interface Cable BKM-220D SDI 4:2:2 Input Adaptor (with serial number 2100001 or higher) BKM-227W NTSC/PAL Input Adaptor BKM-229X Analog Component Input Adaptor (with serial number 2200001or higher) BKM-243HS HD/D1-SDI Input Adaptor (with serial number 2108355 or higher) BKM-244CC HD/SD-SDI Closed Caption Adaptor BKM-250TG 3G/HD/SD-SDI Input Adaptor (with serial number 7300001or higher) |
Notes
Note |
*[1] 48 Hz, 60 Hz and 72 Hz are also compatible with a frame rate of 1/1.001. |
---|---|
Note |
*[2] D-Cine: x = 0.314, y = 0.351 |
Note |
*[3] Chromaticity point of SMPTE RP 431-2 is not covered in full. |
Note |
*[4] The BVM-E170 individual chromaticity points. The widest color space setting of the signal is reproduced by the BVM-E170. R (x = 0.681, y = 0.319)/G (x = 0.189, y = 0.724)/B (x= 0.141, y= 0.051) (typical) |
Note |
*[5] For displaying the color gamut of the wide color space mode S-GAMUT, which is available for the F23 or F35 Digital Cinematography Camera. |
Note |
*[6] The DisplayPort input is available from V1.1. |
Note |
*[7] The signal from the monitor output connector does not satisfy the online signal specifications. |
Note |
*[8] When using 5C-FB coaxial cables (Fujikura or equivalent). |
Note |
*[9] When using 5C-2V coaxial cables (Fujikura or equivalent). |
Note |
*[10] The values for dimensions are approximate. |
Select a product you would like to know more about. We encourage you to learn about our products to help you.
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!