Sony's LMD-2450W is an elegant 24-inch widescreen LCD monitor designed for demanding broadcast and professional applications. LCD displays are increasingly replacing CRT monitors in the professional arena due to their increased operational flexibility and lower overall ownership cost.

This model incorporates a full HD resolution 1920x1200 WUXGA LCD panel, displaying high brightness and contrast images together with a superior viewing angle of 178 degrees. The LMD-2450W offers highly accurate and consistent colour reproduction through its unique Sony ChromaTRU technology. This allows assured picture quality decisions as well as facilitating close colour matching for tiling applications.

Full digital 10-bit processing adds to the already impressive array of specifications, delivering smooth greyscale and colour transitions. Further enhancements include a DVI-D input, enabling a third-party manufacturer's multi-image processor to be connected, an LCD backlight control and an Ethernet remote control function ideal for monitor walls. It also sports a new on-screen audio level meter and video waveform display plus a picture-in-picture mode for greater user flexibility.

Entirely at home in broadcast, OB, production, post-production and corporate environments, the LMD-2450W accepts a wide variety of PC and analogue video formats and optional decoder boards are available for standard and high definition digital video display.

• Type A-Si TFT Active Matrix LCD
• Resolution 1920 x 1200 pixels (WUXGA)
• Picture Size (H x W) (Viewable area) (Diagonal) Approx. 518.4 x 324.0 mm (Approx. 20 1/2 x 12 1/8 inches) Approx. 609.6 mm (24 inches)
• Aspect 16:10 Colours Approx 1,677,000 colours (8bits)
• Viewing Angle 89°/89°/89°/89° (typical) (up/down/left/right contrast>10:1)

Input

• Composite BNC x 1, 1.0 VP-p ±3dB sync negative Y/C 4pin Mini DIN x 1, Y: 1.0 Vp-p ± 3dB sync negative, C: 0.286 Vp-p ± 3dB (NTSC burst signal level), 0.3 Vp-p ± 3dB (PAL burst signal level) RGB, Component BNC x 3, RGB : 0.7 Vp-p ± 3dB (Sync On Green, 0.3 Vp-p sync negative)Component : 0.7 Vp-p ± 3dB (75% chrominance standard colour bar signal) External Sync BNC x 1 0.3 to 4.0 Vp-p ± bipolarity ternary or negative polarity binary Audio RCA pin x 2 (L, R) -5 dBu 47 k ohms or higher HD15 D-sub 15 pin x 1, R/G/B: 0.7 Vp-p sync positive (Sync On Green, 0.3 Vp-p sync negative) Sync Total level (polarity free, H/V separate and composite sync) Plug & Play function : corresponds to DDC-2B DVI TMDS signal link
• Parallel remote Modular connector 8 pin x 1 (pin assignment at users' allocation)
• Serial remote (LAN) D-sub 9-pin (RS232C) x 1, RJ-45 modular connector (ETHERNET) x 1 (10BASE-T/100BASE-TX) DC in XLR type 4pin x 1 DC24V (output impedance 0.005 ohms or less) Optional Option input slot 2 slots (for HD-SDI, SDI capability and extra analogue I/O's)

Output

• Composite BNC x 1, Loop-though, with 75 ohms automatic termination Y/C 4pin mini DIN x 1 Loop-though, with 75 ohms automatic termination RGB, Component BNC x 3, Loop-though, with with 75 ohms automatic termination, External Sync BNC x 1, Loop-though, with 75 ohms automatic termination Audio monitor out RCA pin type x 2 (L, R)
• Speaker (Built-in) 1 W + 1 W (stereo) 
• Power Requirement AC100V to 240V 50/60Hz 0.6A to 1.1A, DC24V 4.6A
• Power Consumption Maximum Approx. 115 W (with 2 x BKM-229X)
• Operating Temperature 0 to 35 °C (recommended operation temperature 20 to 30 °C)
• Operating Humidity 30 to 85% (No condensation)
• Storage & Transport Temperature -20 to 60 °C
• Storage & Transport Humidity 0 to 90 %
• Operating/Storage/Trans. Pressure 700 to 1060 hPa Dimensions (W x H x D)
• Dimension 602.4 x 497.9 x 269.9 mm  Dimension without stand 602.4 x 386.2 x 110.0 mm  Display Stand (W x H x D) 320.0 x 361.5 x 269.9 mm
• Mass With two option boards Approx. 11.4 kg  with BKM-229X x 2 Without option boards Approx. 11.0 kg 

• AC power cord
• Table stand
• Operators manual
• Mains power cord
• Transportation case