Teradek Bolt 500 XT 3G-SDI | HDMI Wireless Transmitter and Receiver Set

SKU: TER-53.10-1935

Main Features:

  • Supports up to 1080p60 Resolution
  • Backward Compatible with Select Systems
  • 3G-SDI and HDMI Inputs/Outputs
  • Cross Conversion
  • Zero Delay
  • 2.4 and 5.8 GHz Noise Rejection
  • AES-128 Encryption

Versions:

XT-500 | XT-500 Delux V-Mt | LT-500 SDI | LT-500 HDMI

XT-1000 | XT-1000 V-Mt | LT-1000 SDI | LT-1000 SDI Delux V-Mt |

XT-3000 | XT-3000 Delux V-Mt

Note: The number after XT or LT refers to the distance in feet transmitted. XT versions have SDI & HDMI inputs/outputs. LT version have either SDI or HDMI inputs/outputs.

(0) No Reviews yet
$3,708.00
RRP:  $3,995.00 
Out of Stock - Order In
Select store to check availability.

Details

The Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set includes one transmitter and one receiver. This enables you to immediately start transmitting up to 1080p60 video from either an SDI or HDMI source. The zero-latency transmitter/receiver pair features a 500' line-of-site transmission distance. You can send and receive visually lossless 3G-video signals from a Bolt 500 transmitter with zero latency. The transmitter features cross conversion, so you take an SDI signal in and loop out either an SDI or HDMI signal to your on-camera monitor. The receiver also features both SDI and HDMI outputs, and the system supports digital SD and HD signals. Although the inputs and outputs support a variety of HD signals in both 50 and 60 Hz standards, as well as 480i and 576i, only HDMI supports 480p and 576p. You can transmit up to three other 3rd-generation Bolt receivers as the transmitter can support up to four receivers. The built-in AES 128-bit encryption helps keep your transmitted video safe from prying eyes.

Specifications

ConstructionMilled Aluminum Chassis and Regulation-Compliant PCB
Video InputsSDI: 1 x BNC (75 Ohm), 3G/HD/SD
HDMI: 1 x HDMI Type A Receptacle
Video OutputsSDI: 1 x BNC (75 Ohm), 3G/HD/SD, Loop-Through
Color SamplingSDI: YCbCr 4:2:2, 10-bit (8-Bit when Format Conversion is Enabled)
HDMI: RGB 4:4:4, 8-Bit
Latency<0.001 Seconds (TX to RX without Format Conversion)
Supported Resolutions1080p: 60/59.94/50/30/29.97/25/24/23.98
1080PsF: 30/29.97/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
480i: 59.94
576i: 50
Video ProcessingCompression
Visually Lossless

Color Correction
CDL/1024 1D LUT (Supports 10-Bit Color)
33x33x33 3D LUT (Supports 10-Bit Color)
Audio Compression48 kHz, 24-bit PCM
Audio InputEmbedded
InterfacesSwitches: On/Off and Reset
Desktop App: Feature-Rich Bolt Manager Application for OS X and Windows
USB Interface Functionality: Upgrade via Mini-USB
WirelessNon-DFS Frequencies
  • UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz
  • EU & JP: 5.19 to 5.23 GHz


DFS Frequencies

  • US: 5.27 to 5.55 GHz and 5.67 GHz
  • EU & JP: 5.27 to 5.67 GHz
RF Power17 dBm EIRP
EncryptionAES-128
RangeUp to 500' / 152.4 m Line of Sight
Unicast MulticastUnicast / Multicast
Noise RejectionCan Coexist with Wi-Fi and 5 GHz Cordless Phones
Power Input2-Pin Connector
7 to 17 VDC
Power ConsumptionNominal 7.3 W (Measured at 1080p60)
Operating Temperature32 to 104°F / 0 to 40°C
Mountable1 x 1/4"-20 Threaded Mounting Hole
2 x M3 Threaded Mounting Holes
Dimensions0.95 x 2.6 x 4.47" / 2.41 x 6.6 x 11.35 cm
Weight8 oz / 226 g

Packaging Info
Box Dimensions (LxWxH)6.7 x 6.5 x 4.8"

Bolt 500 XT 3G-SDI/HDMI Wireless Receiver
ConstructionMilled aluminum Chassis and Regulation-Compliant PCB
Video OutputsSDI: 2 x BNC (75 Ohm), 3G/HD/SD
HDMI: 1 x HDMI Type A Receptacle
USB: 1 x USB Type 3.0 Micro-B Receptacle
Color SamplingSDI: YCbCr 4:2:2, 10-Bit (8-Bit when Format Conversion is Enabled)
HDMI: RGB 4:4:4, 8-Bit
Latency<0.001 Seconds (TX to RX without Format Conversion)
Supported Resolutions1080p: 60/59.94/50/30/29.97/25/24/23.98
1080PsF: 30/29.97/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
576p: 50 (via HDMI Only)
480p: 59.94 (via HDMI Only)
576i: 50
480i: 59.94
Video ProcessingCompression
Visually Lossless

Color Correction
CDL/1024 1D LUT (Supports 10-Bit Color)
33x33x33 3D LUT (Supports 10-Bit Color)
Audio Compression48 kHz, 24-Bit PCM
Audio InputEmbedded
InterfacesSwitches: On/Off and Reset
Desktop App: Feature-Rich Bolt Manager Application for OS X and Windows
USB Interface Functionality: Upgrade via Mini-USB
WirelessNon-DFS Frequencies
  • UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz
  • EU & JP: 5.19 to 5.23 GHz


DFS Frequencies

  • US: 5.27 to 5.55 GHz and 5.67 GHz
  • EU & JP: 5.27 to 5.67 GHz
RF Power15 dBm EIRP
EncryptionAES-128
RangeUp to 500' / 152.4 m Line of Sight
Unicast MulticastUnicast / Multicast
Noise RejectionCan Coexist with Wi-Fi and 5 GHz Cordless Phones
Power Input2-Pin Connector
7 to 28 VDC
Power ConsumptionNominal 9 W (Measured at 1080p60)
Operating Temperature32 to 104°F / 0 to 40°C
Mountable1 x 1/4"-20 Threaded Mounting Hole
2 x M3 Threaded Mounting Holes
Dimensions6 x 3.4 x 1" / 15.24 x 8.64 x 2.54 cm
Weight
  • 10.5 oz / 297.7 g

What's In The Box

General

  • 1 x Protective SKB Case - military-standard waterproof hard case with custom foam (12in x 9in x 4.5in - 30.48cm x 22.86cm x 11.43cm)

Transmitter

  • 1 x 2-pin Connector to PowerTap 18 inch Cable
  • 1 x Hot Shoe Adapter (1/4"-20 inch)
  • 2 x Antenna 2dBi WiFi 2.4/5.8 GHz
  • 1 x USB 2.0 Cable (A-Male to Mini-B)
  • 1 x HDMI 18in Cable (Type A to Type A)
  • 1 x SDI (BNC to BNC) Cable 10 inch

Receiver: Please Note: Should you select the 2 x RX Kit you receive 2 full receiver kits as listed below.

  • 1 x Lightstand Adapter (1/4"-20 inch)
  • 1 x USB 2.0 Cable (A-Male to Mini-B)
  • 1 x PSU 2-Pin Connector to 18W AC Adapter 6ft cable
  • 1 x HDMI 18in Cable (Type A to Type A)
  • 1 x SDI (BNC to BNC) Cable 10 inch

Ratings & reviews

No reviews available

Be the first to Write a review