The Teradek Bolt XT 3000 3G-SDI | HDMI Wireless Transmitter and Receiver Set includes one transmitter and one receiver. This enables you to immediately start transmitting up to 1080p60 video from either an SDI or HDMI source. The zero latency transmitter receiver pair features 3000' line-of-sight transmission distance when used together. You can send and receive visually lossless 3G-video signals from a Bolt 3000 transmitter with zero latency. The transmitter features cross conversion, so you take an SDI signal in and loop out either an SDI or HDMI signal to your on-camera monitor. The receiver also features both SDI and HDMI outputs, and the system supports digital SD and HD signals. Although the inputs and outputs support a variety of HD signals, in both 50 and 60 Hz standards, as well as 480i and 576i. However, 480p and 576p are only supported via HDMI. You can transmit up to three other receiver models such as Bolt 3000 XT, Sidekick II, or 703 Bolt 703, and the transmitter can support up to four receivers. The built-in AES 128-bit encryption helps to keep your transmitted video safe from prying eyes.

• Transmitter
  Construction	Milled aluminum (chassis) and regulation-compliant PCB
  Video Inputs	SDI: 1 x BNC (75 Ohm), 3G/HD/SD HDMI: 1 x HDMI type A receptacle
  Video Outputs	SDI: 1 x BNC (75 Ohm), 3G/HD/SD, loop through
  Color Sampling	SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled) HDMI: RGB 4:4:4, 8-bit
  Latency	<0.001 seconds (Tx to Rx without format conversion)
  Supported Resolutions	1080p: 60/59.94/50/30/29.97/25/24/23.98 1080PsF: 30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 480i: 59.94 576i: 50
  Video Processing	Compression Visually lossless Color Correction CDL/1024 1D LUT (supports 10-bit color) 33x33x33 3D LUT (supports 10-bit color)
  Audio Compression	48 kHz, 24-bit PCM
  Audio Input	Embedded
  Interfaces	Switches: On/Off and Reset Desktop App: Feature-rich Bolt Manager application for Mac OS X and Windows USB Interface Functionality: Upgrade via mini-USB
  Wireless	Non-DFS Frequencies UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz EU & JP: 5.19 to 5.23 GHz DFS Frequencies US: 5.27 to 5.55 GHz and 5.67 GHz EU & JP: 5.27 to 5.67 GHz
  RF Power	17 dBm EIRP
  Encryption	AES-128
  Range	Up to 500' / 152.4 m line of sight
  Unicast Multicast	Unicast / Multicast
  Noise Rejection	Can coexist with WiFi and 5 GHz cordless phones
  Power Input	2-pin connector 7 to 17 VDC
  Power Consumption	Nominal 7.3 W (measured at 1080p60)
  Operating Temperature	32 to 104°F / 0 to 40°C
  Mountable	1 x 1/4"-20 threaded mounting hole 2 x M3 threaded mounting holes
  Dimensions	0.95 x 2.6 x 4.47" / 2.41 x 6.6 x 11.35 cm
  Weight	8 oz / 226 g

• Bolt 3000 XT 3G-SDI/HDMI Wireless Receiver

  Construction	Milled aluminum (chassis) and regulation-compliant PCB
  Video Outputs	SDI: 1 x BNC (75 Ohm), 3G/HD/SD HDMI: 1 x HDMI type A receptacle USB: 1 x Micro-USB 3.0 Type-B receptacle
  SDI Ancillary Data Support	Supports metadata, timecode, and start/stop flags from select camera manufacturers.
  Color Sampling	SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled) HDMI: RGB 4:4:4, 8-bit
  Latency	<0.001 seconds (Tx to Rx without format conversion)
  Supported Resolutions	1080p: 60/59.94/50/30/29.97/25/24/23.98 1080PsF: 30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 576p: 50 (via HDMI only) 480p: 59.94 (via HDMI only) 576i: 50 480i: 59.94
  Video Processing	Compression Visually lossless Color Correction CDL/1024 1D LUT (supports 10-bit color) 33x33x33 3D LUT (supports 10-bit color)
  Audio Compression	48 kHz, 24-bit PCM
  Audio Input	Embedded
  Interfaces	Switches: On/Off and Reset Desktop App: Feature-rich Bolt Manager application for Mac OS X and Windows USB Interface Functionality: Upgrade via mini-USB
  Wireless	Non-DFS Frequencies UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz EU & JP: 5.19 to 5.23 GHz DFS Frequencies US: 5.27 to 5.55 GHz and 5.67 GHz EU & JP: 5.27 to 5.67 GHz
  RF Power	15 dBm EIRP
  Encryption	AES-128
  Range	Up to 3000' / 914.4 m line of sight
  Unicast Multicast	Unicast / Multicast
  Noise Rejection	Can coexist with WiFi and 5 GHz cordless phones
  Power Input	2-pin connector 7 to 28 VDC
  Power Consumption	Nominal 9 W (measured at 1080p60)
  Operating Temperature	32 to 104°F / 0 to 40°C
  Mountable	1 x 1/4"-20 threaded mounting hole 2 x M3 threaded mounting holes
  Dimensions	3.5 x 5.4 x 0.95" / 8.89 x 13.72 x 2.41 cm
  Weight	13.3 oz / 377 g

  Packaging Info
  Box Dimensions (LxWxH)	6.7 x 6.5 x 4.8"

Comes with a Bolt XT 3000 3G-SDI/HDMI Transmitter, a Bolt XT 3000 3G-SDI/HDMI Receiver, and a case. You can choose the battery plate for your needs from our available options: No Battery Plate, V-Mount Plate, AB-Mount Plate 
General

• 1 x Protective SKB Case - military-standard waterproof hard case with custom foam (13.5in x 9.5in x 6.5in - 34.29cm x 24.13cm x 16.51cm)
• 1 x Teradek Vinyl Zipper Bag 250x150mm

Transmitter

• 1 x Bolt XT 3000 TX SDI HDMI
• 1 x Hot Shoe Adapter
• 1 x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable
• 1 x 2pin Conn. to PowerTap - 18in Cable
• 1 x SDI - BNC to BNC Cable, 10in
• 1 x Mini-USB (5pin) to USB - 18in Cable (Firmware Cable)
• 2 x Antenna 5dBi WIFI 5.8GHz (Big Antenna)

Receiver

• 1 x Bolt XT 3000 RX SDI HDMI
• 1 x Lightstand Adapter 3/8in
• 1 x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable
• 1 x SDI - BNC to BNC Cable, 10in
• 1 x Mini-USB (5pin) to USB - 18in Cable (Firmware Cable)
• 1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft Cable

5 x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)

Name:*

Email:*

Question*

* Required Fields

Submit