Details
The Teradek Bolt XT 3000 SDI | HDMI Wireless TX/RX Kit with V-Mount Battery Plate includes one transmitter and one receiver with installed passthrough V-mount battery plate, a panel array antenna, plus a variety of accessories. This enables you to immediately start transmitting up to 1080p60 video from either an SDI or HDMI source. The transmitter/receiver pair features a 3000' line-of-site transmission distance when used together, and you can send and receive visually lossless 3G-video signals from a Bolt 3000 transmitter with zero latency. The transmitter features a loop out SDI connector so you can feed your on-camera monitor. The included panel array antenna is directional for improved signal reliability in one direction when compared to the performance of the included omni-directional antennas. The receiver has a factory installed passthrough V-mount battery plate system that features a male V-mount battery plate on one side of the receiver, and a female V-mount battery plate on the other side of the receiver. The receiver also features both an SDI and HDMI output. The system supports digital SD and HD signals. Although the inputs and outputs support a variety of HD signals in both 50 and 60 Hz standards, 480i and 576i & 480p and 576p are only available through the HDMI output. You can transmit up to a total of four receivers, and either Bolt 3000, Sidekick II, or 703 Bolt receivers are compatible. The built-in AES 128-bit encryption helps to keep your transmitted video safe from prying eyes. Accessory arm and NATO mounts provide mounting options, and the SKB case protects your gear during transport and storage.
Bolt 3000 XT 3G-SDI/HDMI Wireless Transmitter
Construction |
Milled aluminum (chassis) and regulation-compliant PCB |
Video Inputs |
SDI: 1 x BNC (75 Ohm), 3G/HD/SD HDMI: 1 x HDMI type A receptacle |
Video Outputs |
SDI: 1 x BNC (75 Ohm), 3G/HD/SD, loop through |
Color Sampling |
SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled) HDMI: RGB 4:4:4, 8-bit |
Latency |
<0.001 seconds (Tx to Rx without format conversion) |
Supported Resolutions |
1080p: 60/59.94/50/30/29.97/25/24/23.98 1080PsF: 30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 480i: 59.94 576i: 50 |
Video Processing |
Compression Visually lossless
Color Correction CDL/1024 1D LUT (supports 10-bit color) 33x33x33 3D LUT (supports 10-bit color) |
Audio Compression |
48 kHz, 24-bit PCM |
Audio Input |
Embedded |
Interfaces |
Switches: On/Off and Reset Desktop App: Feature-rich Bolt Manager application for Mac OS X and Windows USB Interface Functionality: Upgrade via mini-USB |
Wireless |
Non-DFS Frequencies
- UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz
- EU & JP: 5.19 to 5.23 GHz
DFS Frequencies
- US: 5.27 to 5.55 GHz and 5.67 GHz
- EU & JP: 5.27 to 5.67 GHz
|
RF Power |
17 dBm EIRP |
Encryption |
AES-128 |
Range |
Up to 500' / 152.4 m line of sight |
Unicast Multicast |
Unicast / Multicast |
Noise Rejection |
Can coexist with WiFi and 5 GHz cordless phones |
Power Input |
2-pin connector 7 to 17 VDC |
Power Consumption |
Nominal 7.3 W (measured at 1080p60) |
Operating Temperature |
32 to 104°F / 0 to 40°C |
Mountable |
1 x 1/4"-20 threaded mounting hole 2 x M3 threaded mounting holes |
Dimensions |
0.95 x 2.6 x 4.47" / 2.41 x 6.6 x 11.35 cm |
Weight |
8 oz / 226 g |
Bolt 3000 XT 3G-SDI/HDMI Wireless Receiver
Construction |
Milled aluminum (chassis) and regulation-compliant PCB |
Video Outputs |
SDI: 1 x BNC (75 Ohm), 3G/HD/SD HDMI: 1 x HDMI type A receptacle USB: 1 x Micro-USB 3.0 Type-B receptacle |
SDI Ancillary Data Support |
Supports metadata, timecode, and start/stop flags from select camera manufacturers. |
Color Sampling |
SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled) HDMI: RGB 4:4:4, 8-bit |
Latency |
<0.001 seconds (Tx to Rx without format conversion) |
Supported Resolutions |
1080p: 60/59.94/50/30/29.97/25/24/23.98 1080PsF: 30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 576p: 50 (via HDMI only) 480p: 59.94 (via HDMI only) 576i: 50 480i: 59.94 |
Video Processing |
Compression Visually lossless
Color Correction CDL/1024 1D LUT (supports 10-bit color) 33x33x33 3D LUT (supports 10-bit color) |
Audio Compression |
48 kHz, 24-bit PCM |
Audio Input |
Embedded |
Interfaces |
Switches: On/Off and Reset Desktop App: Feature-rich Bolt Manager application for Mac OS X and Windows USB Interface Functionality: Upgrade via mini-USB |
Wireless |
Non-DFS Frequencies
- UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz
- EU & JP: 5.19 to 5.23 GHz
DFS Frequencies
- US: 5.27 to 5.55 GHz and 5.67 GHz
- EU & JP: 5.27 to 5.67 GHz
|
RF Power |
15 dBm EIRP |
Encryption |
AES-128 |
Range |
Up to 3000' / 914.4 m line of sight |
Unicast Multicast |
Unicast / Multicast |
Noise Rejection |
Can coexist with WiFi and 5 GHz cordless phones |
Power Input |
2-pin connector 7 to 28 VDC |
Power Consumption |
Nominal 9 W (measured at 1080p60) |
Operating Temperature |
32 to 104°F / 0 to 40°C |
Mountable |
1 x 1/4"-20 threaded mounting hole 2 x M3 threaded mounting holes |
Dimensions |
3.5 x 5.4 x 0.95" / 8.89 x 13.72 x 2.41 cm |
Weight |
13.3 oz / 377 g |
Box Dimensions (LxWxH) |
6.7 x 6.5 x 4.8" |
-
Ultra Arm Mini Monitor Mount (1/4"-20 to 1/4"-20)
Top Mount |
1/4"-20 Stud |
Bottom Mount |
1/4"-20 Stud |
Points of Articulation |
2 |
Maximum Length |
5" / 12.7 cm |
Weight |
4.8 oz / 136 g |
Box Dimensions (LxWxH) |
3.8 x 3.4 x 2.3" |
-
NATO Lock Kit
Compatibility |
RED Swat rails Zacuto Z-rails Other 3rd party NATO products |
Dimensions |
1.9 x 1.9 x 0.7" (47.2 x 47.2 x 18.3 mm) |
Weight |
0.1 lb (50 g) |
Box Dimensions (LxWxH) |
3.2 x 2.7 x 0.85" |
Antenna Array for Bolt Receiver
Connector |
RP-SMA plug |
Frequency Range |
5.1-5.8 GHz |
Antenna Gain |
3x16 dBi 2x14 dBi |
Protocol Support |
802.11n (MIMO standard) |
Material of Construction |
UV-protected plastic, aluminum alloy |
Dimensions (LxWxD) |
Antenna: 13.8 x 13.8 x 1.3" (35.0 x 35.0 x 3.2 cm) |
Weight |
Antenna: 2.5 lb (1.1 kg) |
Box Dimensions (LxWxH) |
17.5 x 17.2 x 4.7" |
General
- 1 x Protective SKB Case - military-standard waterproof hard case with custom foam (13.5in x 9.5in x 6.5in - 34.29cm x 24.13cm x 16.51cm)
- 1 x Teradek Vinyl Zipper Bag 250x150mm
Transmitter
- 1 x Bolt XT 3000 TX SDI HDMI
- 1 x Hot Shoe Adapter
- 1 x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable
- 1 x 2pin Conn. to PowerTap - 18in Cable
- 1 x SDI - BNC to BNC Cable, 10in
- 1 x Mini-USB (5pin) to USB - 18in Cable (Firmware Cable)
- 2 x Antenna 5dBi WIFI 5.8GHz (Big Antenna)
Receiver
- 1 x Bolt XT 3000 RX SDI HDMI
- 1 x Lightstand Adapter 3/8in
- 1 x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable
- 1 x SDI - BNC to BNC Cable, 10in
- 1 x Mini-USB (5pin) to USB - 18in Cable (Firmware Cable)
- 1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft Cable
5 x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)
Questions + Answers About Videocraft Products
Select a product you would like to know more about. We encourage you to learn about our products to help you.
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
No Faqs Found in this topic!
Ask A Question