Teradek Bond 757 - Cube 755 and Bond Package
Features
- Real-Time H.265/H.264 Encoder
- Comes with Network Bonding
- H.265 and H.264 encoding
- SDI and HDMI
- Maximum 30 Mbps
- Maximum input resolution 1080p60
- 10 network connections
- Combine up to 5 USB connections, WifFi and Ethernet
Details
The Teradek Bond 757 - Cube 755 and Bond Package includes a Bond 318 Expansion Module, a Cube 755 Encoder, and an MPEG-TS license. The bond module supports up to five USB devices, Ethernet, and Wi-Fi. It also supports up to four iOS devices and is compatible with Cube 605/655, 715/755, and 805/855. The Cube 755 encoder comes with one 3G/HD/SD-SDI (75 Ohm BNC) input and one HDMI type A receptacle input. It can be mounted horizontally or vertically with 1/4"-20 mounting holes.
Teradek Cube 755 HEVC/H.264 HD Encoder
Set up a Teradek Cube 755 HEVC/H.264 HD Encoder and output video for live monitoring on a local area network or stream to a remote destination over a cellular network. SDI and HDMI inputs can accept up to 1080p60 resolution video and any resolution that is accepted by either input can be streamed live over hardwired Ethernet, Wi-Fi, or USB (for connecting a cellular modem), and/or recorded to an SD card at a data rate of up to 30 Mbps. The lightweight chassis itself is built from robust aluminum and it can be secured atop most cameras using the included shoe mount. One side features an OLED panel for displaying device status and menus and a joystick for navigation.
Teradek Bond USB Cellular Expansion Module
The Bond USB Cellular Expansion Module from Teradek combines several 3G/4G/LTE modems into a single bandwidth pipeline so you can stream live and in high definition from a cellular signal area. It connects to any Cube 600, 700, or 800 series through a pogo pin connector and offers up to four additional modem connections via USB (five total with Cube's one USB port), including Teradek Node high performance LTE radios. A built-in, 5 minute Li-ion battery offers continuous power during battery swaps so your transmission is not disrupted.
Teradek MPEG Transport Stream License for Cube Encoders
The Teradek MPEG Transport Stream License for Cube Encoders allows you to create an MPEG-TS over IP (TCP or UDP) video stream that is compatible with television broadcast equipment and IPTV set-top boxes. A license activation key will be e-mailed to you from Teradek after purchase.
Specifications
| Video Input | 1 x 3G/HD/SD-SDI BNC (75 Ohms) 1 x HDMI Type A |
| Bonding | TeraLink |
| Input Resolutions | 1080p 60/59.94/50/30/29.97/25/24/23.98 1080i 60/59.94/50 1080PsF 30/29/25/24/23 576i 480i 720p 60/59.94/50 576p (HDMI input only) 480p (HDMI input only) NTSC PAL |
| Video Compression | H.264: Baseline, Main, and High Profile H.265: Baseline, Main, and High Profile |
| Supported Video Bit Rates | 250 kbps to 30 Mbps |
| Test Pattern Generator Support | Supports custom test pattern |
| Format Conversion | Built-in video scaler and deinterlacer |
| LUT Support | CDL/1024 1D LUT (supports 10-bit color) 33x33x33 3D LUT (supports 10-bit color) |
| Network Protocols | TCP/IP, UDP, HTTP, DHCP, NTP, SSL, IGMP |
| Supported Video Transport Protocols | RTMP RTP, RTSP, RTSP over HTTP MPEG-TS (requires optional paid license) |
| Wi-Fi | 2.4/5GHz 802.11 ac/a/b/g/n MiMo Encryption: 802.1x, 802,11i, WPA2, WPA, and WEP 64/128 TKIP 128bit AES |
| Remote Control | Teradek Core |
| Audio Compression | AAC-LC, MPEG Layer 2 |
| Audio Input | Embedded audio input Analog line or mic in, adjustable gain |
| Audio Output | Headphone output |
| Configuration | WebUI and OLED display with joystick navigation buttons |
| Storage | SD card slot |
| USB Interface | Powered USB 2.0 host port |
| Ethernet | 10/100/1000BASE-T Gigabit |
| Modem Support | USB 3G/4G modem support (check Teradek website for updated list of compatible modems) |
| Mount Type | 1/4"-20 threaded mounting holes allow for horizontal or vertical mounting |
| Power Input | 2-pin connector |
| Power Consumption | 8 W (max) |
| Auxiliary Power Input | 6-28 VDC |
| Dimensions | 4.75 x 3 x 1.1 / 12 x 7.6 x 2.8 cm |
| Weight | 11.6 oz / 329 g |
| Package Weight | 2.25 lb |
| Box Dimensions (LxWxH) | 6.6 x 6.6 x 4.8" |
Teradek Bond USB Cellular Expansion ModuleSpecs
| Interfaces | Controlled through Cube 4x powered USB 2.0 host port |
| Power Consumption | Nominal: 0.5 W, up to 5 W per USB device Power supplied by Cube Internal Li-ion battery |
| Temperature | Operating: 14 to 122°F (-10 to 50°C) Storage: -40 to 194°F (-40 to 90°C) |
| Humidity | Operating: 5% to 95% (non-condensing) Storage: Maximum 90% |
| Construction | Milled aluminum (chassis), regulation-compliant PCB |
| Dimensions | 1 x 3 x 4.7" (24 x 77 x 120 mm) |
| Weight | 7.9 oz (224 g) |
What's In The Box
This set comes with 1 Encoder and 1 Bond Module
Bond Module
- 1 x 2-pin Connector to 30 W AC Adapter 6ft Cable with International Plugs
- 5 x USB Modem Clips
- 1 x USB Modem Plate
- 4 x Thumb Screw Black 4-40 x 3/8 in length
Cube Encoders
- 1 x 2-pin Connector to 18W AC Power Adapter
- 1 x Ethernet Cable
- 1 x SDI 35cm Cable (BNC to BNC)
- 1 x HDMI 91cm Cable (Full Type A to Full Type A)
- 1 x Hot Shoe Adapter
- 1 x 1-Year Warranty
- 2 x Wireless Antennas (2dBi 2.4/5.8 Ghz)
Please Note: Bond to Node cables should not exceed 86cm in length.