Tilta Nucleus-M Wireless Lens Control System Partial Kit V
- Nucleus-M Right Handgrip
- Nucleus-M Left Handgrip
- ARRI-Standard Rosette Adapters
- 2 x Nucleus-M FIZ Lens Control Motors
Note: Batteries are NOT included.
Looking for a short-term solution? Why not hire it from our rental fleet?
Details
This partial kit is a dual-axis system, typically controlling focus and iris, but the hand control units will allow you to control an additional motor (not included) for zoom control when using a zoom lens. The system can wirelessly pull focus from up to 304m away, and available 18650 batteries (not included) can power each hand unit for approximately 10 hours on a single charge. The first motor is powered via the included D-Tap to 7-pin cable, the second motor daisy-chains to the fist via the 7-pin to 7-pin cable for power.
Tilta Nucleus-M Handgrip (Left)
The Tilta left-side Wireless Handgrip provides fingertip lens control while also functioning as a handgrip support for your camera rig. This component of the separately available Nucleus-M FIZ (focus/iris/zoom) system enables you to split control between the handgrip and the hand unit as you prefer.
Tilta Nucleus-M Handgrip (Right)
The Tilta right-side Wireless Handgrip provides fingertip lens control while also functioning as a handgrip support for your camera rig. This component of the separately available Nucleus-M FIZ (focus/iris/zoom) system enables you to split control between the handgrip and the hand unit as you prefer.
Tilta Nucleus-M FIZ Lens Control Motor
The compact Tilta Nucleus-M FIZ Lens Control Motor features an integrated motor drive, eliminating the space of a separate drive box and enabling a quicker setup. Power the motor using a separately available D-Tap cable and power source, or daisy-chain to another motor using a 7-pin cable.
Tilta DSLR Lens Follow Focus Adapter
Use this DSLR Lens Follow Focus Adapter from Tilta to tie around your DSLR lens and control focus with any of Tilta's follow focus systems such as the Nucleus-Nano or Nucleus-M. The adjustable, zip tie-style adapter ring is made of silicone and plastic and ties around most DSLR lenses. The teeth lock into the follow focus motor's gear for smooth adjustments.
Tilta Nucleus-M D-Tap to 7-Pin Motor Power Cable
This 23" Nucleus-M D-Tap to 7-Pin Motor Power Cable from Tilta is designed to power your Nucleus-M lens control motor using a D-Tap power source.
Tilta Nucleus-M 7-Pin Motor-to-Motor Connection Cable (21.65")
The Tilta Nucleus-M 7-Pin Motor-to-Motor Connection Cable is 21.65" long and provides power and control between two Nucleus-M follow focus motors. Please note, you will still need to power one of the motors via a D-Tap to 7-pin cable, or a 3-pin to 7-pin cable connected to a power source. Neither the motors, power cable, nor power source is included.
Tilta ARRI-Standard Rosette Adapters for Nucleus-M Handgrip (L&R)
This set of two ARRI-Standard Rosette Adapters from Tilta is used to mount your Nucleus-M lens control handgrips onto standard ARRI rosettes. Both right and left adapters are included in the set.
Tilta Nucleus-M Battery Charger
The Tilta Nucleus-M Battery Charger can charge one to four batteries used in the handset and handles of the Nucleus-M wireless lens control system. This versatile charger can be powered using AC, 5V USB, or 12V vehicle power.
Specifications
Tilta Nucleus-M Handgrip (Left) Specs
| Current | 0.1 A |
| Voltage | Battery: 7.2 V External: 7.2-14.8 V |
| Port | Power/Communication: 4-pin |
| Rotation | 85, 180, 310° |
| Battery Type | 18650 |
| Operating Frequency | 2.4 GHz |
| Emission Power | 10-100 MW |
| Maximum Transmission Distance | 33-328' / 10-100 m |
| Operating Temperature Range | -4 to 122°F / -20 to 50°C |
| Material of Construction | Aluminum alloy, stainless steel ABS plastic, rubber |
| Dimensions | With Thumb Unit: 6.9 x 3.3 x 2.3" / 17.6 x 8.5 x 6. cm Without Thumb Unit: 6.9 x 3.3 x 1.2" / 17.6 x 8.5 x 3.1 cm |
| Weight | With Thumb Unit: 12.5 oz / 355 g Without Thumb Unit: 12 oz / 340 g |
| Package Weight | 0.59 lb |
| Box Dimensions (LxWxH) | 8.8 x 4.05 x 2" |
Tilta Nucleus-M Handgrip (Right) Specs
| Current | 0.1 A |
| Voltage | Battery: 7.2 V External: 7.2-14.8 V |
| Port | Power/Communication: 4-pin |
| Rotation | 85, 180, 310° |
| Battery Type | 18650 |
| Operating Frequency | 2.4 GHz |
| Emission Power | 10-100 MW |
| Maximum Transmission Distance | 33-328' / 10-100 m |
| Operating Temperature Range | -4 to 122°F / -20 to 50°C |
| Material of Construction | Aluminum alloy, stainless steel ABS plastic, rubber |
| Dimensions | With Thumb Unit: 6.9 x 3.3 x 2.3" / 17.6 x 8.5 x 6. cm Without Thumb Unit: 6.9 x 3.3 x 1.2" / 17.6 x 8.5 x 3.1 cm |
| Weight | With Thumb Unit: 12.5 oz / 355 g Without Thumb Unit: 12 oz / 340 g |
| Package Weight | 0.65 lb |
| Box Dimensions (LxWxH) | 9.5 x 4.15 x 2.7" |
Tilta Nucleus-M FIZ Lens Control Motor Specs
| Gear Mod | 0.8 |
| Gear Pitch | 32 |
| Number of Gear Teeth | 35 |
| Face Width | 0.4" / 10 mm |
| Operating Frequency | 2.4 GHz |
| Maximum Range | 1640' / 500 m (unobstructed) |
| Emission Power | 30-100 MW |
| Current | Quiescent: 0.10 A, 14.8 V Conventional: 0.5 A, 14.8 V |
| Voltage | 7.2-24 V |
| Rod Compatibility | 19, 15 mm |
| Noise | 15 dB |
| Operating Temperature Range | -4 to 122°F / -20 to 50°C |
| Material of Construction | Aluminum alloy, stainless steel, ABS plastic |
| Dimensions | 4.50 x 3.25 x 1.38" / 11.43 x 8.26 x 3.49 cm |
| Weight | 6.7 oz / 190 g (motor only) 7.9 oz / 225 g (with 15mm rod adapter) 7.8 oz / 221 g (with 19mm rod adapter) |
| Package Weight | 0.495 lb |
| Box Dimensions (LxWxH) | 6.45 x 4.65 x 1.4" |
Tilta DSLR Lens Follow Focus Adapter Specs
| Material of Construction | Silicone and plastic |
| Compatibility | Tilta Nucleus-M, Nucleus-Nano Most DSLR lenses |
| Dimensions | Not supplied by manufacturer |
| Weight | Not supplied by manufacturer |
| Package Weight | 0.05 lb |
| Box Dimensions (LxWxH) | 3.9 x 3.75 x 0.5" |
Tilta Nucleus-M D-Tap To 7-Pin Motor Power Cable Specs
| Connectors | D-Tap, 7-pin LEMO-type |
| Length | 23" / 58.4 cm |
| Weight | 1.1 oz / 32 g |
| Package Weight | 0.13 lb |
| Box Dimensions (LxWxH) | 6.25 x 5.75 x 1.15" |
Tilta Nucleus-M 7-Pin Motor-To-Motor Connection Cable (21.65") Specs
| Material of Construction | Aluminum Alloy, Copper, Rubber |
| Connectors | 7-Pin |
| Length | 21.65" / 55.0 cm |
| Package Weight | 0.095 lb |
| Box Dimensions (LxWxH) | 4.85 x 2.8 x 0.6" |
Tilta ARRI-Standard Rosette Adapters For Nucleus-M Handgrip (L&R) Specs
| Material of Construction | Aluminum alloy, stainless steel |
| Dimensions | 2.3 x 2 x 1.5" / 5.7 x 5.1 x 3.8 cm |
| Weight | 2.5 oz / 72 g |
| Package Weight | 0.35 lb |
| Box Dimensions (LxWxH) | 4.5 x 2.9 x 1.7" |
Tilta Nucleus-M Battery Charger Specs
| Power Input | 100-240 VAC, 50/60 Hz, 0.15 A 5 VDC, 2 A |
| Power Output | 4.2 VDC, 650 mAh |
| Material of Construction | Plastic |
| Package Weight | 0.6 lb |
| Box Dimensions (LxWxH) | 7.5 x 5.8 x 1.7" |
What's In The Box
Partial Kit V
- (1) Left wireless handle
- (1) Finger wheel
- (1) Right wireless handle
- (1) Finger wheel
- (1) Zoom toggle
- (1) Brushless wireless motor with 19mm rod support and 15mm rod bushings
- (1) 55cm 7-pin to 7-pin motor connection cable
- (1) Photographic Lens Follow Focus Adapter
- (1) 74cm 7-pin to P-tap motor power cable
- (1) Hand Grip to Arri Standard Rosette Adapters
- (1) Wireless FIZ hand unit strap
- (1) 18650 quad battery charger (batteries NOT included)