Benro BV10 Twin-Leg Aluminium Tripod Kit
- 10 kg Load Capacity
- 100mm Head
- Flat Base by Removing Tie-Down Stud
- 5-Step Counterbalance
- Independent 4-Step Pan & Tilt Drag
- Manfrotto 501/504PL Type Sliding Plate
- 2-Stage Twin Leg Aluminum Tripod
- 73 to 163cm Height Range
Details
The Benro BV10 Twin-Leg Aluminium Tripod Kit is a complete tripod system ideal for studio applications and handling larger, fully rigged cameras weighing up to 10kgs.
The kit pairs the 100mm-ball BV10 video head with a twin-leg aluminium tripod. The BV10 head features a 5-step counterbalance system to dial in the correct amount for your setup, and independent 4-step pan and tilt drag settings for precise control over camera movements. A Manfrotto 501/504PL compatible sliding quick-release plate is provided. All the main controls aside from the counterbalance are located on the left side of the head, making it easy to adjust with a single hand while operating the camera. For added versatility, the 100mm ball tie-down stud is removable to convert the head to a flat base for use on a slider or other support device.
The 2-stage, 3-section twin-leg aluminium tripod incorporates a 100mm bowl and offers sturdy support for the BV10 head. It features oversized quick positive leg locks for a simple and fast setup, an adjustable/removable mid-level spreader, and dual spiked feet with removable rubber pads. The tripod system extends to a maximum height of 64.4", while getting as low as 29". A carry case and shoulder strap are included.
- Supports up to 10kgs
- Removable tie-down stud to convert to flat base head
- 5-step (0 to 4) counterbalance
- Independent 4-step (0 to 3) pan and tilt drag
- -65° to +90° tilt range
- Manfrotto 501/504PL compatible sliding plate
- Two 3/8"-16 accessory threads for mounting accessories, such as a monitor or recorder
- Bubble level
- Twin-leg aluminum tripod with 100mm bowl fitting
- 73 to 163cm height range (with head attached)
- Oversized twist-lever leg locks
- Adjustable/removable mid-level spreader
- Dual spiked feet with removable rubber pads
Specifications
Load Capacity | 22 lb / 10 kg |
Head Mount | 100 mm bowl |
Counterbalance | 5-step (0 to 4) |
Pan Drag | 4-step (0 to 3) fluid cartridge |
Tilt Drag | 4-step (0 to 3) fluid cartridge |
Panning Range | 360° |
Tilt Range | -65° to +90° |
Quick Release Plate | QR13 (Manfrotto 501/504PL compatible) 1/4"-20 and 3/8"-16 cameras screws |
Accessory Mounting Threads | 2 x 3/8"-16 |
Material | Aluminum |
Stages | 2 |
Sections | 3 |
Minimum Height | 29" / 73.6 cm |
Maximum Height | 64.4" / 163.5 cm, at 24° leg angle with column extended |
Folded Length | 34.6" / 88 cm |
Weight | 16 lb / 7.3 kg |
What's In The Box
- Benro BV10 Twin-Leg Aluminum Tripod Kit
- Benro QR13 Quick Release Plate
- Benro BS02 Pan Bar Handle
- Benro ML08 Mid-Level Spreader for H-Series Twin Leg Tripods
- 3 x Benro SP02 Rubber Pivot Foot for H-Series Twin Leg Tripods
- Carry Case
- Strap
- Limited 3-Year Warranty, Extendable to 5 Years with Registration