Miller CX10 Sprinter II 2-Stage Alloy Tripod System with Mid-Level Spreader
- CX10 100mm Fluid Head with 12kg Payload
- 1580 Sprinter II 2-Stage Alloy Tripod
- Continuous Variable Adjustment Spreader
- 16mm Fixed-Length Pan Handle
- Arrowx 2-Stage Soft Case
- Rubber Foot Pads
- 15+0 Steps of Counterbalance
- 5+0 Steps of Pan and Tilt Drag
- 44 to 153cm Working Tripod Height
- High-Speed Independent Dual Leg Locks
Details
Miller CX10 Fluid Head
The Miller CX10 Fluid Head is designed to accommodate a wide payload range with 16 steps of counterbalance. Pan, tilt and counterbalance can all be set to zero, enabling even the lightest of cameras to be supported. Maxed out, this head is rated to support camera setups up to 26.4 pounds, adequate for small cinema cameras with rigs or medium-sized ENG camcorders. Securing your camera or rig is easy. The sideload plate design enables you to simply drop in your camera without the alignment issues posed by rear-loading variations. The plate offers 2.4" of sliding range to balance your rig.
Miller Sprinter II 2-Stage Alloy Tripod (Mid-Level Spreader Ready)
The Miller Sprinter II 2-Stage Alloy Tripod is a quick-setup solution for a tripod head with a 100mm ball base. Its lightweight, flip-locks, and rigid construction allow for durability without compromising usability in ENG, EFP, and other pro video applications. Unlike many traditional multi-stage designs, both flip-locks are located on the same section for easy reaching, no matter the height setting. The fast setup is complemented by an in-line carry handle, for portability on set or in the field. Compatible spreaders, rubber feet, and dollys are available separately.
Miller 475 Rubber Feet Pads for Select Tripods (Set of 3)
The 475 Tripod Feet from Miller are a set of three rubber snap-on feet designed to be used in any situation where the integrated dual spiked feet are not optimal. They are ideal for use on both slippery and glossy floors. These rubber feet are compatible with all tripods with a 993 mid-level spreader.
Miller Arrowx soft case 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems (Black)
Store, transport, and protect your gear with the black Miller Arrowx soft case 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems. The case features a zipper closure, top and bottom cradles with straps to secure your tripod, and backpack straps with a storage pocket. For strength and durability, the case is constructed with a ballistic nylon shell and hard plastic skid pads. Carry the case with dual strap handles or padded grab handles. You can also attach a sold-separately shoulder strap to the case D-links. An external pocket and cardholder make case identification easier.
Specifications
Payload Range | 0-12kg (0-26.4lbs) |
Weight | 7.8kg (17.2lbs) |
Height Range | 603-1693mm (23.7-66.6”) |
Transport Length | 853mm (33.6”) |
Counterbalance Positions | 16 selectable positions (15+0) |
Pan Tilt Drag | 5 Selectable fluid drag positions + 0 |
Pan Tilt Locks | Positive lock caliper brake system |
Tilt Range | + 90°/ -75° |
Pan Range | 360° |
Camera Platform | Quick release, side load camera plate |
Sliding Range | 60mm (2.4") |
Mounting Base | Ø100mm (3.9") ball levelling |
Height Above Bowl | 150mm (6.0") |
Illuminated Controls | Bubble level |
Pan Handle | Fixed length 390mm (15.4") |
Temperature Range | -40° to +65°C (-40° to +149°F) |
Leg Extension | 2-stage |
Lock Type | HS aual action |
Leg Material | Alloy |
What's In The Box
1096 | CX10 fluid head |
---|---|
1580 | Sprinter II 2-stage tripod (alloy) |
993 | Mid-level spreader |
475 | Rubber feet (set of 3) |
679 | Pan handle - fixed with clamp |
3502 | Arrow softcase 2-stage |