Panasonic Touchscreen PTZ Remote Camera Controller
SKU: PAN-AW-RP150GJ
- Control up to 200 Compatible PTZ Cameras
- Serial Control 5 Cameras Directly
- Zoom/Focus Rocker Joystick
- Touch Panel GUI, Touch Focus & More
Details
The Panasonic PTZ Touchscreen Remote Camera Controller allows you to control up to 200 compatible Panasonic PTZ cameras over IP via a switching hub. Or you can control five cameras via direct RS-422 connection. Please see the list of supported cameras in the Features section below. The controller features a zoom/focus rocker on the joystick for pan and tilt operations, many onboard buttons, and additional controls within the 7" touchscreen LCD. It also has an SD card slot, which allows saving scene files, system settings files, and other camera settings as well as copying settings over to other cameras. Note: A power supply is sold separately. A 12V, 4-pin XLR power supply is required.
Specifications
| Input | 1 x 3G-SDI on BNC, SMPTE292 / 75 Ohms |
| Output | 1 x 3G-SDI on BNC, Active Loop Out, SMPTE292 / 75 Ohms |
| Supported Input Formats | 1080p/59.94/50 (Level-A Support Only) 1080p/23.98/25 1080PsF/23.98/25 1080i/59.94/50 |
| IP Control | 1 x RJ-45 100BASE‚ÄëTX PoE+ Input Max LAN Cable Length Supported: 328' / 100 m |
| Serial Control | 5 x RJ-45 (RS-422, Tally Out) Max Cable Length Supported: 3280' / 1000 m (Cat 5e or Higher Shielded Cable) Tally Out: Open Collector Output (Negative Logic) 24 VDC Maximum Voltage Resistance, 50 mA Maximum Current |
| Tally/GPIO 1 | 1 x 25-Pin D-Sub Tally In: 10 Inputs (for Photocoupler Signals) GPI: 6 Inputs (for Photocoupler Signals) GPIO: 5 Inputs (for Photocoupler Signals) or 5 Outputs (Open Collector Outputs, Negative Logic) |
| GPIO 2 | 1 x 25-Pin D-Sub GPI: 10 Inputs (for Photocoupler Signals) GPIO: 10 Inputs (for Photocoupler Signals) or 10 Outputs (Open Collector Outputs, Negative Logic) |
| LCD Display | 7" Touch Panel GUI Monitor 800 x 480 (WVGA) Resolution |
| Memory Card Slot | 1 x SD Card Slot (SDHC/SDXC) |
| Number of Cameras Supported | 200 (IP), 5 (RS-422) |
| Camera Selection Buttons | 10 |
| Camera Groups | 20 (10 Units per 1 Group) |
| Tracing Memory | Cam1 to Cam10 5-Minute Recording Time per Camera 10 Memory Settings per Camera |
| User Assignable Buttons | 6 (Plus 10 on the LCD Menu) |
| Pan / Tilt Adjustment | 7 Speed Levels |
| Tally LED Indicator | Green / Red |
| Power Input | 12 VDC, 4-Pin XLR |
| Power Requirements | 12 VDC (10.8 to 13.2 V) |
| PoE+ | IEEE802.3at Standard: 42 to 57 VDC (Camera Input) |
| Current Consumption | 1.0 A (Connector Input) 0.6 A (PoE+ Power Supply) |
| Operating Temperature | 32 to 104°F / 0 to 40°C |
| Relative Humidity | 20 to 90% (No Condensation) |
| Storage Temperature | -4 to 122°F / -20 to 50°C |
| Dimensions | 13.5 x 7 x 9.6" / 34.2 x 17.8 x 24.5 cm (Excluding Protrusions) |
| Weight | Approx 7 lb / 3.2 kg |
What's In The Box
Panasonic Touchscreen PTZ Remote Camera Controller