Rode NTG1 Directional Condenser Microphone
Details
The Rode NTG1 Condenser Shotgun Microphone is designed for professional audio capturing in the field or indoors. A super-cardioid polar pattern and line plus gradient acoustic principle effectively minimize audio and noise at the off-axis (sides) of the microphone, while the front of the capsule accurately reproduces incoming audio signal.
Rode's NTG-1 Condenser Shotgun Microphone is designed for professional audio capturing in the field or indoors. With a history of manufacturing quality studio microphones, Rode has implemented low noise output electronics and wide bandwidth, both of which attribute to the NTG-1's broadcast sound quality. The super cardioid polar pattern and line plus gradient acoustic principle effectively minimize audio and noise at the off-axis (sides) of the microphone, while the front of the capsule accurately reproduces incoming audio signal.
The result is greater intelligibility and signal-to-noise ratio while using the NTG-1 in noisy environments. The NTG-1 is powered with an external +48 Volt phantom power source; the output is a standard 3-pin XLR male connector. The microphone features a rugged, all-metal, lightweight enclosure that is ideal for camera mounting yet durable enough to withstand the rigours of heavy road use. The Rode NTG-1 is packaged with a microphone stand mount and windscreen.
Key features:
- Super-Cardioid Polar Pattern The super-cardioid polar pattern and line gradient acoustic principle allow for a narrow pick-up pattern at the front of the capsule while minimizing noise at the off-axis sections.
- Lightweight Durable Construction The NTG-1 features a lightweight metal housing that is ideal for camera mounting.
- Low Handling Noise Low noise output electronics provides high signal-to-noise ratio. The NTG-1 is designed to also reduce noise caused by handling, rigid mounting hardware, loose cabling etc.
Specifications
Form Factor | Stand/Boom Mount |
Sound Field | Mono |
Operating Principle | Line Gradient |
Capsule | Condenser |
Diaphragm | 0.5" / 12.70 mm |
Polar Pattern | Supercardioid |
Orientation | End Address |
Circuitry | Solid-State (JFET) |
Pad | None |
High-Pass Filter | 80 Hz, 12 dB/Octave |
Tone Adjustment | None |
Gain Adjustment | None |
Indicators | None |
On-Board Controls | High-Pass Filter |
Windscreen | Foam (Included) |
Frequency Range | 20 Hz to 20 kHz |
Maximum SPL | 139 dB SPL (1 kHz, 1% THD, 1-Kilohm Load) |
Off-Axis Rejection | 14 dB at 60° 16 dB at 120° 12 dB at 180° |
Impedance | 50 Ohms |
Sensitivity | -36 dBV/Pa at 1 kHz |
Output Level | 6.9 mV (Max) |
Dynamic Range | 121 dB |
Signal-to-Noise Ratio | 76 dB A-Weighted (1 kHz) |
Equivalent Noise Level | 18 dB A-Weighted |
Output Connectors (Analog) | 1 x XLR 3-Pin |
Operating Voltage | 24 to 48 V |
Color | Black |
Mounting | Mic Clip/Stand Adapter (with Included Hardware) |
Mounting Thread Size | 5/8"-27 Female (3/8"-16 Female with Included Adapter) |
Included Case | Zipper Pouch |
Construction Material | Aluminum |
Dimensions | ø: 0.87 x L: 8.62" / ø: 22 x L: 219 mm |
Weight | 3.7 oz / 105 g (Microphone) |
What's In The Box
- Rode NTG-1 Condenser Shotgun Microphone
- Microphone Stand Mount
- Windscreen
- Zippered Pouch