Pelican 1535Air Black Wheeled Carry-On Case with TrekPak Insert
Main Features:
- Watertight, Dustproof, Crushproof Case
- Made of Super-Light Polymer
- TrekPak Insert
- ABS Double Throw Latches
- Watertight O-Ring Gasket
- Built-In Purge Valve
- Stainless Steel Hasp Protectors
- Conic Curve Lid Shape & Wheels
- Overmolded Handles & Trolley Handle
- Polycarbonate Card Holder
Details
Pelican 1535Air Black Wheeled Carry-On Case with TrekPak Insert combines strength and lightness, is watertight, crushproof, dustproof, and optimized for travel. For travel by air, Pelican has aggregated available airline rules for maximum overhead and check-in dimensions with the goal of creating a case that conforms to their requirements.
The Pelican 1525Air case is made of a super-light, proprietary HPX polymer with honeycomb structural elements that is up to 40% lighter than most other Pelican polymers. This confidence-inspiring design has been drop-tested on concrete on all sides and corners while loaded with gear. Not content with stopping there, the case has also been tested with a 28 lb steel dart dropped from a height of three feet.
Besides being lighter, Pelican has also improved the divider system. The system is called TrekPak and uses pre-installed wall sections, divider panels, locking pins, and an easy-to-use cutting tool. Simply lay your gear in the case, measure and cut the divider sections, and lock them in place with the steel U-pins. Extra divider material is included for occasions where your equipment requirements vary. 7/16" thick divider sections are made of waterproof, closed cell foam that is laminated to a rigid, corrugated plastic panel that resists tearing and shredding. The TrekPak is combined with 1" bottom foam and lid foam to give your gear 360-degree protection.
Specifications
Material | Body: HPX polypropylene blend polymer Latch: ABS O-Ring: EPDM Purge Body: ABS Purge Vent: Hi-flow Gore-Tex 3-micron hydrophobic non-woven Purge O-Ring: 70 Shore Nitrile |
Waterproofing | Watertight o-ring gasket |
Maximum Buoyancy | Floats in salt water with 64.8 lbs / 29.4 kg |
Temperature Range | 0 - 140°F / -18 - 60°C |
Type of Closure | Hinged with double ABS latches |
Interior Fitting | TrekPak insert |
Carrying/Transport Options | Overmolded handle, extending trolley handle, and wheels |
Volume | 7.1 gal / 26.9 L |
Interior Dimensions | Overall: 20.39 x 11.2 x 7.21" / 51.8 x 28.4 x 18.3 cm Bottom Depth: 5.21" / 13.2 cm Lid Depth: 2" / 5.1 cm |
Exterior Dimensions | 21.96 x 13.97 x 8.98" / 55.8 x 35.5 x 22.8 cm |
Weight | 9.98 lb / 4.53 kg |
What's In The Box
- TrekPak Insert
- Limited Lifetime Warranty