Rode NTG4 Shotgun Microphone with Digital Switches

SKU: ROD-NTG4

Main Features:

  • For Indie Films, TV & Documentaries
  • Convenient Digital Switching
  • Phantom Powered
  • Switchable Treble Boost and -10 dB Pad


Model:

NTG-1 | NTG-2 | NTG-3B | NTG-4 | NTG-4+ | NTG-5 | NTG-8


Note: Powered by Phantom Power Only. No battery. This is the newer version of the NTG1

(0) No Reviews yet
$395.00
RRP:  $449.00 
In Stock
Select store to check availability.

Details

The Rode NTG4 Shotgun Microphone with Digital Switches is designed for ENG, filmmaking, field recording, sound design, and broadcast applications. The microphone builds upon the success of the company's NTG1 and NTG2 microphones with an updated capsule to deliver broadcast quality sound and digital switching options for versatile field operation.

 

Quality Sound Capture
The combination of the NTG4's 8.9" long body and supercardioid polar pattern yields focused front-facing directionality and enhanced attenuation of sound entering from the sides. Its low self-noise of 16 dBA and sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones. Plus, its balanced output allows longer cable runs than most camera-mount shotgun microphones.


Phantom Powered
Thanks to its 3-pin XLR output and compliance with 12, 24, or 48 VDC phantom power, the NTG4 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters as well as built-in preamps on many camcorders and cinema cameras.


Customizable Tone via Digital Switching
Digital switching not only allows for intuitive access to the NTG4's settings, but it also retains their states when the mic is switched off. Activate the 75 Hz low-cut filter to reduce low-frequency noise from common sources such as air conditioners and traffic. Use the +6 dB treble boost for enhanced clarity and intelligibility (best for environments with minimal high-frequency ambient noise). When loud sound sources threaten to distort your recording, switch on the -10 dB pad to attenuate the input level.


Ideal for Boompole Mounting
The lightweight, metal-bodied NTG4 includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the NTG4 in the Rode SM4-R shockmount or Rode PG2-R pistol grip (both available separately) to impede the transfer of vibrations in boompole or handheld applications.


Windscreen Minimizes Wind Noise
The NTG4 has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider the Rode Blimp furry windshield and shockmount suspension system (available separately).

Specifications

Microphone
Sound FieldMono
Operating PrincipleLine Gradient
CapsuleCondenser
Diaphragm0.5" / 12.70 mm
Polar PatternSupercardioid
CircuitrySolid-State
Pad-10 dB
Low-Cut Filter@ 75 Hz
Performance
Frequency Range20 Hz to 20 kHz
Maximum SPL135 dB SPL
Impedance200 Ohms
Sensitivity-32 dBV/Pa at 1 kHz
Dynamic Range119 dB
Signal-to-Noise Ratio78 dB
Equivalent Noise Level16 dB A-Weighted
Connectivity
Output Connectors1 x 3-Pin XLR
Power
Operating Voltage12 to 48 V
Operating Current Consumption4.5 mA
Physical
Length8.86" / 225 mm
Diameter0.87" / 22 mm
Weight4.44 oz / 126 g

What's In The Box

    • Rode NTG4 Shotgun Microphone
        • Foam Windscreen
          • Padded Zip Pouch
            • Limited 1-Year Warranty, Extendable to 10 Years upon Registration

            Ratings & reviews

            No reviews available

            Be the first to Write a review