Tentacle TRACK E Pocket Audio Recorder Basic Box with Timecode Support

The Tentacle TRACK E Pocket Audio Recorder Basic Box with Timecode Support is nearly as small as the Timecode Sync Generator SYNC E, so it can easily fit in your pocket for recording on the go. This allows mobile operation for example as a recorder for a clip-on microphone eliminating the need for a radio link. It offers timecode synchronization over Bluetooth® based on the well-established Tentacle Sync technology. This means that the TRACK E will work in environments where regular wireless transmitters fail.

Controllable through the Setup App for iOS or Android, it seamlessly integrates into the SYNC E synchronization network by the push of a button via Bluetooth®. But the TRACK E does not necessarily need a SYNC E device to operate – it can easily function as a stand-alone device and can be jam-synced via cable. In addition to the ability to record with 24-bit depth, TRACK E also features 32-bit floating point technology for a significantly extended dynamic range. 32-bit floating point also means that no digital clipping will occur, making the TRACK E a versatile set-&-forget-device that will always deliver high-quality audio. With the TRACK E users can similarly treat audio as photographers use the RAW camera photo format – all details can be adjusted in post-production, significantly reducing the preparation time before you start shooting.

TRACK E uses a changeable microSD Card for recording the audio. An input limiter and a high-pass filter guarantee pristine recording quality. A screwable mini jack connector offers maximum security for connecting microphones. TRACK E features 5V plugin power for supporting a wide range of microphones. A free license of Tentacle Sync Studio (Mac) is included with every TRACK E purchase.

Recording

Number of Tracks: 1
Sampling Rate: 48 kHz
Recording Bit-Depth: 32-bit Float / 24-bit
Recording File Formats: WAV (BWF)
Recording Time: 30hrs (24-bit) / 23hrs (32-bit Float) with 16GB Card
Storage Media: microSDHC Card up to 32GB (Class 10) not included
Signal Processing: Low Cut Filter, Limiter (24-bit only)

Connectivity

Microphone Input: 3.5mm Jack (screw lock)
Mic Plug-In Power: 5 V (switchable)
Headphone Output*: 3.5mm Jack
USB Connection: USB-C (USB 2.0)
USB Modes: Charging, Card Reader, Firmware Update

Performance

Frequency Response: 20Hz – 20kHz
Gain Range: +6 to +46dB
Dynamic Range: 110dB typ
THD+N: ≤ -85 dB (0,05%)

Control & Sync

Bluetooth®: 5 Low Energy
Remote Control: Tentacle Setup App (iOS/Android)
Synchronization: Via Bluetooth® (Tentacle Setup App) or Jam-Sync via Cable
Timecode Input: LTC via Mic In
Timecode Output: N/A
Frame Rates: SMPTE 12M / 23.98, 24, 25, 29.97, 29.97DF, 30

Power

Power Source: Built-in rechargeable Lithium Polymer Battery
Battery Capacity: 900 mAh
Battery Operation Time: approx. 10 Hours
Battery Charging Time: max. 2 Hours

Mounting: Belt Clip (removable) – Black Powder-Coated Stainless Steel

Weight: 58 g / 2.1 oz
Dimensions: 47 x 68 x 19 mm / 1.85 x 2.67 x 0.74 inches

* In the US version the headphone output is deactivated during recording.

Recommended microSD Cards

Recommended are SanDisk/WD 8/16/32GB or similar high-grade Class 10 SDHC up to 32GB. We have tested the following cards:

• SanDisk Edge 16GB/32GB
• SanDisk Ultra 16/32 GB
• SanDisk Extreme 16/32GB
• SanDisk Extreme PRO 16/32GB